root> ...srxentedge-15.1X49-D50.3-domestic.tgz no-validate reboot
Installing package '/var/tmp/junos-srxentedge-15.1X49-D50.3-domestic.tgz' ...
Verified junos-srxentedge-15.1X49-D50.3-domestic.tgz signed by JuniperSecurityProducts_2014
Adding ...
Saving contents of boot area prior to installation
WARNING: This package will load JUNOS 15.1X49 software.
WARNING: It will save JUNOS configuration files, and SSH keys
WARNING: (if configured), but erase all other files and information
WARNING: stored on this machine. It will attempt to preserve dumps
WARNING: and log files, but this can not be guaranteed. This is the
WARNING: pre-installation stage and all the software is loaded when
WARNING: you reboot the system.
Saving the config files ...
NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install
Pushing Junos image package to the host...
Installing /var/tmp/install-media-srx-700e-junos-15.1X49-D50.3.tgz
Extracting the package ...
total 657588
-rw-r--r-- 1 30426 950 225003104 Jun 16 07:33 junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
-rw-r--r-- 1 30426 950 448364060 Jun 16 07:33 junos-srx-700e-junos-15.1X49-D50.3-app.tgz
Setting up Junos host applications for installation ...
============================================
Host OS upgrade is FORCED
Current Host OS version: 1.0.0
New Host OS version: 1.0.0
Min host OS version required for applications: 0.2.4
============================================
Validate linux image...
upgrade_platform: -------------------
upgrade_platform: Parameters passed:
upgrade_platform: silent=0
upgrade_platform: package=/var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
upgrade_platform: clean install=0
upgrade_platform: clean upgrade=0
upgrade_platform: Need reboot after staging=1
upgrade_platform: -------------------
upgrade_platform:
upgrade_platform: Checking input /var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz ...
upgrade_platform: Input package /var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz is valid.
Secure Boot is enforced.
ALLOW:usr/secureboot/grub/BOOTX64.EFI
ALLOW:boot/bzImage-intel-x86-64.bin
ALLOW:boot/initramfs.cpio.gz
Installing Host OS ...
upgrade_platform: -------------------
upgrade_platform: Parameters passed:
upgrade_platform: silent=0
upgrade_platform: package=/var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
upgrade_platform: clean install=0
upgrade_platform: clean upgrade=0
upgrade_platform: Need reboot after staging=0
upgrade_platform: -------------------
upgrade_platform:
upgrade_platform: Checking input /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz ...
upgrade_platform: Input package /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz is valid.
Secure Boot is enforced.
ALLOW:usr/secureboot/grub/BOOTX64.EFI
ALLOW:boot/bzImage-intel-x86-64.bin
ALLOW:boot/initramfs.cpio.gz
upgrade_platform: Backing up boot assets..
bzImage-intel-x86-64.bin: OK
initramfs.cpio.gz: OK
version.txt: OK
initrd.cpio.gz: OK
upgrade_platform: Checksum verified and OK...
/boot
upgrade_platform: Backup completed
upgrade_platform: Staging the upgrade package - /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz..
./
./initramfs.cpio.gz.psig
./bzImage-intel-x86-64.bin
./initramfs.cpio.gz
./bzImage-intel-x86-64.bin.psig
./upgrade_platform
./HOST_COMPAT_VERSION
./version.txt
./initrd.cpio.gz
./linux.checksum
./host-version
bzImage-intel-x86-64.bin: OK
initramfs.cpio.gz: OK
version.txt: OK
upgrade_platform: Checksum verified and OK...
1096751 blocks
upgrade_platform: Staging of /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz completed
upgrade_platform: System need *REBOOT* to complete the upgrade
upgrade_platform: Run upgrade_platform with option -r | --rollback to rollback the upgrade
Host OS upgrade staged. Reboot the system to complete installation!
WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the
WARNING: 'request system reboot' command when software installation is
WARNING: complete. To abort the installation, do not reboot your system,
WARNING: instead use the 'request system software delete junos'
WARNING: command as soon as this operation completes.
Saving package file in /var/sw/pkg/junos-srxentedge-15.1X49-D50.3-domestic-signed.tgz ...
Saving state for rollback ...
Rebooting ...
shutdown: [pid 9329]
Shutdown NOW!
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
root> Poweroff for hypervisor to respawn
Message from syslogd@ at Jun 16 07:36:22 ...
CMLC: Going disconnected; Routing engine chassis socket closed abruptly
Jun 16 07:36:24 init: event-processing (PID 1147) exited with status=1
.
Jun 16 07:36:41 init: sysctl-relay-process (PID 1444) exited with status=0 Normal Exit
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 29m13s
recorded reboot as normal shutdown
Powering system off using ACPI
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 1587)
.
Stopping Advanced Configuration and Power Interface daemon: stopped /usr/sbin/acpid (pid 1623)
acpid.
Stopping domain name service: named.
Stopping system message bus: dbus.
stopping DNS forwarder and DHCP server: dnsmasq... stopped /usr/bin/dnsmasq (pid 1909)
done.
Shutting down irqbalance: stopped irqbalance (pid 1687)
done
stopping mountd: done
stopping nfsd: done
Stopping monit:
stopping rsyslogd ... done
Stopping internet superserver: xinetd.
stopping idmapd: done
stopping statd: done
Clearing ebtables rulesets: filter nat broute done. ok
Stopping crond: OK
Stopping rpcbind daemon...
done.
* Stopping virtualization library daemon: libvirtd [ ok ]
Deconfiguring network interfaces... done.
Stopping tcsd: OK
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Stopping portmap daemon...
Deactivating swap...
Unmounting local filesystems...
Rebooting... LPC-DRV: reboot notifier called with 0x0001
Restarting system.
U
3h
3h
3h
InsydeH2O version : SRXS_SFP_00.26_00.01
BIOS Build Date : 11/06/2015
System Memory Speed : 1600 MHz
Processor Type : Intel(R) Xeon(R) CPU @ 2.50GHz
CPUID : 306A9
Secure boot is enforced
Press Esc for boot options
Now booting : EFI HDD Device (TS16DSTMM1600)
Juniper CMOS BootOrder Value Before Incrementing: 0x013F
Juniper CMOS BootOrder Value After Incrementing: 0x023F
Welcome to GRUB!
Secure Grub2 Diskboot
error: can't find command `serial'.
error: terminal `serial' isn't found.
error: terminal `serial' isn't found.
GNU GRUB version 2.02~juniper/rel_v3~
/----------------------------------------------------------------------------\
| Juniper Linux |
| Juniper Linux Debug |
|*Juniper-Linux-Upgrade |
| Juniper-Linux-Recovery |
| |
| |
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `Juniper-Linux-Upgrade'
Upgrading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
igb 0000:07:00.3: Hardware Initialization Failure
Mounting boot device LABEL=LINUX-BOOT
Unpacking initrd.cpio.gz ....
1096751 blocks
Unmount boot device LABEL=LINUX-BOOT
cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5
cpld i2c mapped 0x22558010
cpld i2c number 6
Installation on
Starting the platform upgrade..
Formatting root file system ..
mke2fs 1.42.8 (20-Jun-2013)
[ OK ] root file system formatted
Install EFI componets
Install secure bootloader
Install recovery BIOS
Installing rootfs files...
1096751 blocks
[ OK ] Rootfs installation completed.
Updating fstabs and other config files ..
Platform Installation completed.
INIT: version 2.88 booting
Starting udev
touch: cannot touch '/var/lock/subsys/local': No such file or directory
Creating platform specific configurations.
running pre rc upgrade steps on SRX1500
Check secure grub
[ OK ] secure grub installed
Creating grub configuration file..
[ OK ] grub configuration file created.
No new BIOS update capsule found.
Updating boot environment ..
[ OK ] boot environment updated
Completing the required package installation
Adding package group: pkg-srx-700e-junos
Adding package path: /var/sw/packages/pkg-srx-700e-junos
Installing package: platform-junos
Auditing: package
[ OK ] platform-junos
3 logical volume(s) in volume group "vg0_vjunos" now active
PV VG Fmt Attr PSize PFree
/dev/sdb vg0_vjunos lvm2 a-- 93.16g 0
VG #PV #LV #SN Attr VSize VFree
vg0_vjunos 1 3 0 wz--n- 93.16g 0
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
lv_junos vg0_vjunos -wi-a--- 55.89g
lv_junos_core vg0_vjunos -wi-a--- 9.31g
lv_junos_recovery vg0_vjunos -wi-a--- 27.95g
Setting up boot params ...
Updating Junos boot environment ...
[ OK ] Junos boot environment updated
------------------------------------------------
Running Junos application installer
------------------------------------------------
-------------------------------
Installing /var/sw/packages/applications/pkg-app-junos.tgz
-------------------------------
========================================
Installing srx-700e-platform-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-platform-1.0-0@x86_64
10.0MB of package files are needed. 47.4MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
Output from srx-700e-platform-1.0-0@x86_64:
*********************************************************
* After platform installation reach 100% *
* It might take 5 mins on FPGA upgrade if needed *
* please be patient... ... *
*********************************************************
1:InstaSRX1500 FPGA registered with UIO ( 0%)
1:Installing srx-700e-plat.. ######################################## [100%]
FPGA {VERSION: 5c10_0946} is going to be updated by FPGA {VERSION: 6311_0537}... ...
It might take around 5 mins, please be patient... ...
Start to erase, taking several minutes ...
Erase done.
Start to write 26724840 bytes to Flash.
Finished 2097152 Bytes --------------------- 7%
Finished 4194304 Bytes --------------------- 15%
Finished 6291456 Bytes --------------------- 23%
Finished 8388608 Bytes --------------------- 31%
Finished 10485760 Bytes --------------------- 39%
Finished 12582912 Bytes --------------------- 47%
Finished 14680064 Bytes --------------------- 54%
Finished 16777216 Bytes --------------------- 62%
Finished 18874368 Bytes --------------------- 70%
Finished 20971520 Bytes --------------------- 78%
Finished 23068672 Bytes --------------------- 86%
Finished 25165824 Bytes --------------------- 94%
Finished 26724840 Bytes --------------------- 100%
Done.
========================================
Installing srx-700e-base-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-base-1.0-0@x86_64
812.9kB of package files are needed. 2.8MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-700e-base ######################################## [100%]
Saving cache...
========================================
Installing srx-700e-data-plane-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-data-plane-1.0-0@x86_64
103.7MB of package files are needed. 305.9MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-700e-data.. ######################################## [100%]
Saving cache...
========================================
Installing srx-control-plane-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-control-plane-1.0-0@x86_64
325.6MB of package files are needed. 325.5MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-control-p.. ######################################## [100%]
Output from srx-control-plane-1.0-0@x86_64:
-------------------------------
Installing JUNOS image: junos-srxjcp-15.1X49-D50.3-domestic.img.gz
-------------------------------
Extracting junos-srxjcp-15.1X49-D50.3-domestic.img.gz to /recovery/junos/junos-srxjcp-15.1X49-D50.3-domestic-201606160744.img
Switching active Junos to /recovery/junos/junos-srxjcp-15.1X49-D50.3-domestic-201606160744.img
/var/tmp/rpm-tmp.67533: line 292: /usr/sbin/copy-dst2varplatform: No such file or directory
Saving cache...
[ OK ] Application installed.
/
saving the image for rollback
---------------------------------------------
[ OK ] Installation for Junos
Rebooting the system to complete the installation
---------------------------------------------
/usr/sbin/virt-what: line 85: /usr/sbin/virt-what-Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed
Stopping Advanced Configuration and Power Interface daemon: no /usr/sbin/acpid found; none killed
acpid.
Stopping domain name service: named.
Stopping system message bus: dbus.
stopping DNS forwarder and DHCP server: dnsmasq... no /usr/bin/dnsmasq found; none killed
Shutting down irqbalance: no irqbalance found; none killed
done
stopping mountd: done
stopping nfsd: done
stopping rsyslogd ... done
Stopping internet superserver: xinetd.
stopping statd: done
Clearing ebtables rulesets: filter nat broute done. ok
Stopping crond: FAIL
Stopping rpcbind daemon...
not running.
* Stopping virtualization library daemon: libvirtd [fail]
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
done.
Stopping tcsd: FAIL
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Stopping portmap daemon...
Deactivating swap...
Unmounting local filesystems...
Rebooting... LPC-DRV: reboot notifier called with 0x0001
Restarting system.
U
3h
3h
3h
InsydeH2O version : SRXS_SFP_00.26_00.01
BIOS Build Date : 11/06/2015
System Memory Speed : 1600 MHz
Processor Type : Intel(R) Xeon(R) CPU @ 2.50GHz
CPUID : 306A9
Secure boot is enforced
Press Esc for boot options
Now booting : EFI HDD Device (TS16DSTMM1600)
Juniper CMOS BootOrder Value Before Incrementing: 0x023F
Juniper CMOS BootOrder Value After Incrementing: 0x033F
Welcome to GRUB!
Secure Grub2 Diskboot
error: can't find command `serial'.
error: terminal `serial' isn't found.
error: terminal `serial' isn't found.
GNU GRUB version 2.02~juniper/rel_v3~
/----------------------------------------------------------------------------\
|*Juniper Linux |
| Juniper Linux Debug |
| Juniper-Linux-Recovery |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `Juniper Linux'
Loading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
igb 0000:07:00.3: Hardware Initialization Failure
Mounting boot device LABEL=LINUX-BOOT
Unpacking initrd.cpio.gz ....
1096751 blocks
Unmount boot device LABEL=LINUX-BOOT
INIT: version 2.88 booting
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5
cpld i2c mapped 0x22582010
cpld i2c number 6
running pre rc steps on SRX1500
disable_srx_boot_device
set_srx_boot_device
3 logical volume(s) in volume group "vg0_vjunos" now active
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
In init_module
In init_module - after register_chrdev
In init_module
In init_module - after register_chrdev
Starting Bootlog daemon: bootlogd.
Populating dev cache
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
kernel.core_uses_pid = 0
kernel.core_pattern = |/etc/init.d/zipcore.sh /var/tmp/corefiles/ %h.%e.%p.%t.core %e
fs.suid_dumpable = 2
vm.swappiness = 1
vm.vfs_cache_pressure = 50
INIT: Entering runlevel: 3
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Configuring network interfaces... done.
Starting rpcbind daemon...rpcbind: cannot bind * on udp: Address already in use
rpcbind: cannot bind tcp: Address already in use
done.
creating NFS state directory: done
starting statd: done
Starting Advanced Configuration and Power Interface daemon: acpid.
acpid: starting up
acpid: 1 rule loaded
acpid: waiting for events: event logging is off
Starting domain name service: namedwrote key file "/etc/bind/rndc.key"
.
starting DNS forwarder and DHCP server: dnsmasq...
dnsmasq: failed to create listening socket for port 53: Address already in use
Starting irqbalance: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting rsyslogd ... done
Starting internet superserver: xinetd.
* Starting virtualization library daemon: libvirtd
no /usr/bin/dnsmasq found; none killed [ ok ]
Starting tcsd: OK
Starting crond: OK
Checking BIOS and Synchronizing recovery capsule
Synchronizing UEFI key-store:
Junper Dev keys are not revoked. Doing nothing
Booting normal on SRX1500
/root: 5.4 GiB (5822832640 bytes) trimmed
/var: 4.3 GiB (4638838784 bytes) trimmed
/app_disk: 1.3 GiB (1346297856 bytes) trimmed
Executing application: pkg-app-junos
Initializing JUNOS Host applications
[ OK ] Application initialization.
Stopping internet superserver: xinetd.
Starting internet superserver: xinetd.
net.ipv4.ip_forward = 1
Starting SRX
Creating platform specific configurations.
mv: cannot stat '/var/tmp/corefiles/*': No such file or directory
ifup: interface eth0 already configured
add map loop0p1 (252:3): 0 62500 linear /dev/loop0 1
add map loop0p2 (252:4): 0 187500 linear /dev/loop0 62501
/etc/init.d/rc.junosapp: line 251: [: 17G: integer expression expected
20+0 records in
20+0 records out
20 bytes (20 B) copied, 0.000334551 s, 59.8 kB/s
4+0 records in
4+0 records out
4 bytes (4 B) copied, 0.000322997 s, 12.4 kB/s
7+0 records in
7+0 records out
7 bytes (7 B) copied, 0.000324607 s, 21.6 kB/s
stopping idmapd: done
stopping statd: done
creating NFS state directory: done
starting statd: done
starting idmapd: rpc.idmapd: libnfsidmap: requested translation method, 'nsswitch', is not available
rpc.idmapd: Unable to create name to user id mappings.
done
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
kdump: unrecognized service
Starting OpenBSD Secure Shell server: sshd
/usr/sbin/sshd is already running
2024
starting rsyslogd ... done
Starting internet superserver: xinetd.
sntpc: unrecognized service
Starting crond: FAIL
watchdog: unrecognized service
Starting lcmd: [ OK ]
Starting vehostd: [ OK ]
Starting monit: Generated unique Monit id 6d80d44863840eebaaf1f580dae6dc27 and stored to '/root/.monit.id'
Starting monit daemon with http interface at [localhost:2812]
Monit start delay set -- pause for 60s
[ OK ]
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
Processing file: /etc/dh89xxcc_qa_dev0.conf
Stopping Bootlog daemon: bootlogd.
Consoles: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
BIOS 639kB/1999864kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.2
(builder@ralenth.juniper.net, Sat May 28 19:03:37 2016)
Loading /boot/defaults/loader.conf
/kernel text=0xa68a64 data=0x63b3c+0x11fc78 syms=[0x4+0xb58d0+0x4+0x10a928]
/boot/modules/libmbpool.ko text=0xce8 data=0x114 /
/boot/modules/if_em_vsrx.ko text=0x1869c data=0x840+0x1a4 -
/boot/modules/virtio.ko text=0x2168 data=0x208 syms=[0x4+0x7f0+0x4+0x972]
/boot/modules/virtio_pci.ko text=0x2de8 data=0x200+0x8 syms=[0x4+0x900+0x4+0xb22]
/boot/modules/virtio_blk.ko text=0x299c data=0x1dc+0xc syms=[0x4+0x970+0x4+0xa0f]
/boot/modules/if_vtnet.ko text=0x616c data=0x354+0x10 syms=[0x4+0xe20+0x4+0xf2f]
/boot/modules/pci_hgcomm.ko text=0x12fc data=0x1a4+0x44 syms=[0x4+0x570+0x4+0x61d]
/boot/modules/pvi_db.ko text=0x27f8 data=0x315+0x2f syms=[0x4+0x610+0x4+0x5be]
/boot/modules/chassis.ko text=0x9bc data=0x1d3+0x11 syms=[0x4+0x3a0+0x4+0x399]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
platform_early_bootinit: Early Boot Initialization
tvp mode is true jnx_reboot_reason: 16384
mac base ff:ff:ff:ff:ff:ff len 255
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:23:47 UTC
builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/i386/junos/bsd/kernels/SRXJCP/kernel
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: QEMU Virtual CPU version 1.5.0 (2500.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x781abfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,PAT,MMX,FXSR,SSE,SSE2>
Features2=0x80800001<SSE3,POPCNT,<b31>>
real memory = 2048917504 (1954 MB)
avail memory = 1387745280 (1323 MB)
ACPI APIC Table: <BOCHS BXPCAPIC>
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Initializing SRXTVP platform properties ..
pci-hgcomdev module loadedacpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc200-0xc20f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, USB> at device 1.2 (no driver attached)
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc1a0-0xc1bf mem 0xfebe0000-0xfebe0fff irq 11 at device 3.0 on pci0
em0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci1: <VirtIO PCI Network adapter> port 0xc1c0-0xc1df mem 0xfebe1000-0xfebe1fff irq 11 at device 4.0 on pci0
em1: <VirtIO Networking Adapter> on virtio_pci1
virtio_pci1: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci1: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci2: <VirtIO PCI Network adapter> port 0xc1e0-0xc1ff mem 0xfebe2000-0xfebe2fff irq 10 at device 5.0 on pci0
em2: <VirtIO Networking Adapter> on virtio_pci2
virtio_pci2: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci2: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci3: <VirtIO PCI Block adapter> port 0xc000-0xc03f mem 0xfebe3000-0xfebe3fff irq 10 at device 6.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000cd4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,SCSICmds,BlockSize,DiskGeometry,MaxNu>
virtio_pci3: negotiated features: 0x10000054 <RingIndirect,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 509MB (1044288 512 byte sectors)
virtio_pci4: <VirtIO PCI Block adapter> port 0xc040-0xc07f mem 0xfebe4000-0xfebe4fff irq 11 at device 7.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci4
virtio_pci4: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci4: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 16384MB (33554432 512 byte sectors)
virtio_pci5: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xfebe5000-0xfebe5fff irq 11 at device 8.0 on pci0
vtblk2: <VirtIO Block Adapter> on virtio_pci5
virtio_pci5: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci5: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk2: 102MB (209715 512 byte sectors)
virtio_pci6: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xfebe6000-0xfebe6fff irq 10 at device 9.0 on pci0
vtblk3: <VirtIO Block Adapter> on virtio_pci6
virtio_pci6: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci6: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk3: 128MB (262144 512 byte sectors)
virtio_pci7: <VirtIO PCI Block adapter> port 0xc100-0xc13f mem 0xfebe7000-0xfebe7fff irq 10 at device 10.0 on pci0
vtblk4: <VirtIO Block Adapter> on virtio_pci7
virtio_pci7: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci7: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk4: 614MB (1259059 512 byte sectors)
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc140-0xc17f mem 0xfebc0000-0xfebdffff irq 11 at device 16.0 0
em3: Memory Access and/or Bus Master bits were not set!
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebe8000-0xfebe83ff irq 10 at device 17.0 on pci0
usb0: EHCI version 1.0
usb0: <EHCI (generic) USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
hgcommdev0: <HGCOMMDEV For Host VM communication> mem 0xfebe9000-0xfebe9fff at device 22.0 on pci0
hgcommdev0: hgcommdev: registers at 0xf606c000
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROM> at iomem 0xe5800-0xeffff on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: MDA <16 virtual consoles, flags=0x300>
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
TVP: Model Name read from HostOS is srx1500
Initializing product: 192 ..
fxp0: bus=0, device=16, func=0, Ethernet address 44:f4:77:40:35:8a
Timecounter "TSC" frequency 2500012840 Hz quality 800
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Loading JUNOS chassis module
chassis_init_hw_chassis_startup_time: chassis startup time 0.000000
Kernel thread "wkupdaemon" (pid 54) exited prematurely.
Trying to mount root from ufs:/dev/vtbd0s1a
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md0...
Automatic reboot in progress...
** /dev/vtbd0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 87227 free (3 frags, 21806 blocks, 0.0% fragmentation)
Verified junos signed by PackageProductionEc_2016 method ECDSA256+SHA256
Verified jboot signed by PackageProductionEc_2016 method ECDSA256+SHA256
veriexec: cannot update veriexec for /sbin/preinit: Too many links
Verified junos-srxjcp-15.1X49-D50.3-domestic signed by PackageProductionEc_2016 method ECDSA256+SHA256
Detected data disk
** /dev/vtbd1s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 825449 free (25 frags, 103178 blocks, 0.0% fragmentation)
** /dev/vtbd1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 6742524 free (276 frags, 842781 blocks, 0.0% fragmentation)
remount /config...success
remount /var...success
Initialize /var subdirs...
Mounting shared partition /var/host ..
Detected swap drive
*** Creating PVIDb..\n
849+0 records in
849+0 records out
441480 bytes transferred in 0.064506 secs (6844009 bytes/sec)
hw.re.gres_sync_other: 0 -> 1
hw.re.gres_sync_other: 1 -> 0
vmguest: setup ...
vmguest: Found smbios variables, skipping reboot.
Loading configuration ...
mgd: commit complete
Setting initial options: .
Starting optional daemons: usbd.
Doing initial network setup:
.
Initial interface configuration:
kenv: unable to get vmtype
[: =: unexpected operator
additional daemons: eventd.
checking for core dump...
savecore: Reboot reason(s): 0x10: misc hardware reason
savecore: Reboot reason(s): 0x10: misc hardware reason
savecore: no dumps found
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/;
kld netpfe drv: ifpfed_ep ifpfed_esp ifpfed_ism ifpfed_ml_ha ifpfed_ppeer ifpfed_ps ifpfed_st ifpfed_vtkld platform: fileassoc id
kats kldIPsec: Initialized Security Association Processing.
resrsv.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.i386 initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
kern.timecounter.hardware: ACPI-safe -> TSC
Thu Jun 16 07:46:59 UTC 2016
Jun 16 07:46:59 init: exec_command: /usr/sbin/bfdd (PID 1400) started
Jun 16 07:46:59 init: neighbor-liveness (PID 1400) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/pppd (PID 1402) started
Jun 16 07:46:59 init: ppp (PID 1402) started
Jun 16 07:46:59 init: event-processing (PID 1162) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/l2cpd (PID 1403) started
Jun 16 07:46:59 init: l2cpd-service (PID 1403) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/oamd (PID 1404) started
Jun 16 07:46:59 init: tunnel-oamd (PID 1404) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/lfmd (PID 1405) started
Jun 16 07:46:59 init: ethernet-link-fault-management (PID 1405) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/jdhcpd (PID 1406) started
Jun 16 07:46:59 init: dhcp-service (PID 1406) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/authd (PID 1407) started
Jun 16 07:46:59 init: general-authentication-service (PID 1407) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/mplsoamd (PID 1408) started
Jun 16 07:46:59 init: mpls-traceroute (PID 1408) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/bdbrepd (PID 1409) started
Jun 16 07:46:59 init: database-replication (PID 1409) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sendd (PID 1410) started
Jun 16 07:46:59 init: secure-neighbor-discovery (PID 1410) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/smid (PID 1411) started
Jun 16 07:46:59 init: subscriber-management (PID 1411) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/shm-rtsdbd (PID 1412) started
Jun 16 07:46:59 init: shm-rtsdbd (PID 1412) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/gstatd (PID 1413) started
Jun 16 07:46:59 init: gstatd (PID 1413) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nfsd (PID 1414) started
Jun 16 07:46:59 init: nfsd-service (PID 1414) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/jsrpd (PID 1415) started
Jun 16 07:46:59 init: jsrp-service (PID 1415) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nsd (PID 1416) started
Jun 16 07:46:59 init: network-security (PID 1416) started
Jun 16 07:46:59 init: exec_command: /etc/mount-crash (PID 1417) started
Jun 16 07:46:59 init: mount_crash (PID 1417) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sdk-vmmd (PID 1418) started
Jun 16 07:46:59 init: app-engine-virtual-machine-management-service (PID 1418) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/tnp.sntpd (PID 1419) started
Jun 16 07:46:59 init: sntp-iri4 (PID 1419) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/inetd (PID 1421) started
Jun 16 07:46:59 init: ftp-inet-process (PID 1421) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/pkid (PID 1424) started
Jun 16 07:46:59 init: pki-service (PID 1424) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/httpd-gk (PID 1425) started
Jun 16 07:46:59 init: web-management (PID 1425) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/mountd (PID 1426) started
Jun 16 07:46:59 init: mountd-service (PID 1426) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/appidd (PID 1427) started
Jun 16 07:46:59 init: application-identification (PID 1427) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/appsecured (PID 1428) started
Jun 16 07:46:59 init: application-security (PID 1428) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/idpd (PID 1429) started
Jun 16 07:46:59 init: idp-policy (PID 1429) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/ipfd (PID 1430) started
Jun 16 07:46:59 init: security-intelligence (PID 1430) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/aamwd (PID 1431) started
Jun 16 07:46:59 init: advanced-anti-malware (PID 1431) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nstraced (PID 1432) started
Jun 16 07:46:59 init: network-security-trace (PID 1432) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/rtlogd (PID 1433) started
Jun 16 07:46:59 init: security-log (PID 1433) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/utmd (PID 1434) started
Jun 16 07:46:59 init: utmd (PID 1434) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sysctlrelayd (PID 1435) started
Jun 16 07:46:59 init: sysctl-relay-process (PID 1435) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/xntpd (PID 1436) started
Jun 16 07:46:59 init: ntpd-service (PID 1436) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/syshmd (PID 1437) started
Jun 16 07:46:59 init: system-health-management (PID 1437) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/smtpd (PID 1438) started
Jun 16 07:46:59 init: simple-mail-client-service (PID 1438) started
Jun 16 07:46:59 init: can not access /usr/sbin/ipmid: No such file or directory
Jun 16 07:46:59 init: ipmi (PID 0) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/wmic (PID 1439) started
Jun 16 07:46:59 init: jnx-wmicd-service (PID 1439) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/webapid (PID 1440) started
Jun 16 07:46:59 init: webapi-service (PID 1440) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/license-check (PID 1441) started
Jun 16 07:46:59 init: license-service (PID 1441) started
Jun 16 07:47:00 init: exec_command: /usr/sbin/sdxd (PID 1443) started
Jun 16 07:47:00 init: service-deployment (PID 1443) started
Jun 16 07:47:00 init: Starting of initial processes complete
Amnesiac (ttyd0)
login:
Installing package '/var/tmp/junos-srxentedge-15.1X49-D50.3-domestic.tgz' ...
Verified junos-srxentedge-15.1X49-D50.3-domestic.tgz signed by JuniperSecurityProducts_2014
Adding ...
Saving contents of boot area prior to installation
WARNING: This package will load JUNOS 15.1X49 software.
WARNING: It will save JUNOS configuration files, and SSH keys
WARNING: (if configured), but erase all other files and information
WARNING: stored on this machine. It will attempt to preserve dumps
WARNING: and log files, but this can not be guaranteed. This is the
WARNING: pre-installation stage and all the software is loaded when
WARNING: you reboot the system.
Saving the config files ...
NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install
Pushing Junos image package to the host...
Installing /var/tmp/install-media-srx-700e-junos-15.1X49-D50.3.tgz
Extracting the package ...
total 657588
-rw-r--r-- 1 30426 950 225003104 Jun 16 07:33 junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
-rw-r--r-- 1 30426 950 448364060 Jun 16 07:33 junos-srx-700e-junos-15.1X49-D50.3-app.tgz
Setting up Junos host applications for installation ...
============================================
Host OS upgrade is FORCED
Current Host OS version: 1.0.0
New Host OS version: 1.0.0
Min host OS version required for applications: 0.2.4
============================================
Validate linux image...
upgrade_platform: -------------------
upgrade_platform: Parameters passed:
upgrade_platform: silent=0
upgrade_platform: package=/var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
upgrade_platform: clean install=0
upgrade_platform: clean upgrade=0
upgrade_platform: Need reboot after staging=1
upgrade_platform: -------------------
upgrade_platform:
upgrade_platform: Checking input /var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz ...
upgrade_platform: Input package /var/tmp/tmp.sVvQobQUwwjunos_cli_upg/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz is valid.
Secure Boot is enforced.
ALLOW:usr/secureboot/grub/BOOTX64.EFI
ALLOW:boot/bzImage-intel-x86-64.bin
ALLOW:boot/initramfs.cpio.gz
Installing Host OS ...
upgrade_platform: -------------------
upgrade_platform: Parameters passed:
upgrade_platform: silent=0
upgrade_platform: package=/var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz
upgrade_platform: clean install=0
upgrade_platform: clean upgrade=0
upgrade_platform: Need reboot after staging=0
upgrade_platform: -------------------
upgrade_platform:
upgrade_platform: Checking input /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz ...
upgrade_platform: Input package /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz is valid.
Secure Boot is enforced.
ALLOW:usr/secureboot/grub/BOOTX64.EFI
ALLOW:boot/bzImage-intel-x86-64.bin
ALLOW:boot/initramfs.cpio.gz
upgrade_platform: Backing up boot assets..
bzImage-intel-x86-64.bin: OK
initramfs.cpio.gz: OK
version.txt: OK
initrd.cpio.gz: OK
upgrade_platform: Checksum verified and OK...
/boot
upgrade_platform: Backup completed
upgrade_platform: Staging the upgrade package - /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz..
./
./initramfs.cpio.gz.psig
./bzImage-intel-x86-64.bin
./initramfs.cpio.gz
./bzImage-intel-x86-64.bin.psig
./upgrade_platform
./HOST_COMPAT_VERSION
./version.txt
./initrd.cpio.gz
./linux.checksum
./host-version
bzImage-intel-x86-64.bin: OK
initramfs.cpio.gz: OK
version.txt: OK
upgrade_platform: Checksum verified and OK...
1096751 blocks
upgrade_platform: Staging of /var/tmp/junos-srx-700e-junos-15.1X49-D50.3-linux.tgz completed
upgrade_platform: System need *REBOOT* to complete the upgrade
upgrade_platform: Run upgrade_platform with option -r | --rollback to rollback the upgrade
Host OS upgrade staged. Reboot the system to complete installation!
WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the
WARNING: 'request system reboot' command when software installation is
WARNING: complete. To abort the installation, do not reboot your system,
WARNING: instead use the 'request system software delete junos'
WARNING: command as soon as this operation completes.
Saving package file in /var/sw/pkg/junos-srxentedge-15.1X49-D50.3-domestic-signed.tgz ...
Saving state for rollback ...
Rebooting ...
shutdown: [pid 9329]
Shutdown NOW!
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
root> Poweroff for hypervisor to respawn
Message from syslogd@ at Jun 16 07:36:22 ...
CMLC: Going disconnected; Routing engine chassis socket closed abruptly
Jun 16 07:36:24 init: event-processing (PID 1147) exited with status=1
.
Jun 16 07:36:41 init: sysctl-relay-process (PID 1444) exited with status=0 Normal Exit
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 29m13s
recorded reboot as normal shutdown
Powering system off using ACPI
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 1587)
.
Stopping Advanced Configuration and Power Interface daemon: stopped /usr/sbin/acpid (pid 1623)
acpid.
Stopping domain name service: named.
Stopping system message bus: dbus.
stopping DNS forwarder and DHCP server: dnsmasq... stopped /usr/bin/dnsmasq (pid 1909)
done.
Shutting down irqbalance: stopped irqbalance (pid 1687)
done
stopping mountd: done
stopping nfsd: done
Stopping monit:
stopping rsyslogd ... done
Stopping internet superserver: xinetd.
stopping idmapd: done
stopping statd: done
Clearing ebtables rulesets: filter nat broute done. ok
Stopping crond: OK
Stopping rpcbind daemon...
done.
* Stopping virtualization library daemon: libvirtd [ ok ]
Deconfiguring network interfaces... done.
Stopping tcsd: OK
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Stopping portmap daemon...
Deactivating swap...
Unmounting local filesystems...
Rebooting... LPC-DRV: reboot notifier called with 0x0001
Restarting system.
U
3h
3h
3h
InsydeH2O version : SRXS_SFP_00.26_00.01
BIOS Build Date : 11/06/2015
System Memory Speed : 1600 MHz
Processor Type : Intel(R) Xeon(R) CPU @ 2.50GHz
CPUID : 306A9
Secure boot is enforced
Press Esc for boot options
Now booting : EFI HDD Device (TS16DSTMM1600)
Juniper CMOS BootOrder Value Before Incrementing: 0x013F
Juniper CMOS BootOrder Value After Incrementing: 0x023F
Welcome to GRUB!
Secure Grub2 Diskboot
error: can't find command `serial'.
error: terminal `serial' isn't found.
error: terminal `serial' isn't found.
GNU GRUB version 2.02~juniper/rel_v3~
/----------------------------------------------------------------------------\
| Juniper Linux |
| Juniper Linux Debug |
|*Juniper-Linux-Upgrade |
| Juniper-Linux-Recovery |
| |
| |
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `Juniper-Linux-Upgrade'
Upgrading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
igb 0000:07:00.3: Hardware Initialization Failure
Mounting boot device LABEL=LINUX-BOOT
Unpacking initrd.cpio.gz ....
1096751 blocks
Unmount boot device LABEL=LINUX-BOOT
cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5
cpld i2c mapped 0x22558010
cpld i2c number 6
Installation on
Starting the platform upgrade..
Formatting root file system ..
mke2fs 1.42.8 (20-Jun-2013)
[ OK ] root file system formatted
Install EFI componets
Install secure bootloader
Install recovery BIOS
Installing rootfs files...
1096751 blocks
[ OK ] Rootfs installation completed.
Updating fstabs and other config files ..
Platform Installation completed.
INIT: version 2.88 booting
Starting udev
touch: cannot touch '/var/lock/subsys/local': No such file or directory
Creating platform specific configurations.
running pre rc upgrade steps on SRX1500
Check secure grub
[ OK ] secure grub installed
Creating grub configuration file..
[ OK ] grub configuration file created.
No new BIOS update capsule found.
Updating boot environment ..
[ OK ] boot environment updated
Completing the required package installation
Adding package group: pkg-srx-700e-junos
Adding package path: /var/sw/packages/pkg-srx-700e-junos
Installing package: platform-junos
Auditing: package
[ OK ] platform-junos
3 logical volume(s) in volume group "vg0_vjunos" now active
PV VG Fmt Attr PSize PFree
/dev/sdb vg0_vjunos lvm2 a-- 93.16g 0
VG #PV #LV #SN Attr VSize VFree
vg0_vjunos 1 3 0 wz--n- 93.16g 0
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
lv_junos vg0_vjunos -wi-a--- 55.89g
lv_junos_core vg0_vjunos -wi-a--- 9.31g
lv_junos_recovery vg0_vjunos -wi-a--- 27.95g
Setting up boot params ...
Updating Junos boot environment ...
[ OK ] Junos boot environment updated
------------------------------------------------
Running Junos application installer
------------------------------------------------
-------------------------------
Installing /var/sw/packages/applications/pkg-app-junos.tgz
-------------------------------
========================================
Installing srx-700e-platform-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-platform-1.0-0@x86_64
10.0MB of package files are needed. 47.4MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
Output from srx-700e-platform-1.0-0@x86_64:
*********************************************************
* After platform installation reach 100% *
* It might take 5 mins on FPGA upgrade if needed *
* please be patient... ... *
*********************************************************
1:InstaSRX1500 FPGA registered with UIO ( 0%)
1:Installing srx-700e-plat.. ######################################## [100%]
FPGA {VERSION: 5c10_0946} is going to be updated by FPGA {VERSION: 6311_0537}... ...
It might take around 5 mins, please be patient... ...
Start to erase, taking several minutes ...
Erase done.
Start to write 26724840 bytes to Flash.
Finished 2097152 Bytes --------------------- 7%
Finished 4194304 Bytes --------------------- 15%
Finished 6291456 Bytes --------------------- 23%
Finished 8388608 Bytes --------------------- 31%
Finished 10485760 Bytes --------------------- 39%
Finished 12582912 Bytes --------------------- 47%
Finished 14680064 Bytes --------------------- 54%
Finished 16777216 Bytes --------------------- 62%
Finished 18874368 Bytes --------------------- 70%
Finished 20971520 Bytes --------------------- 78%
Finished 23068672 Bytes --------------------- 86%
Finished 25165824 Bytes --------------------- 94%
Finished 26724840 Bytes --------------------- 100%
Done.
========================================
Installing srx-700e-base-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-base-1.0-0@x86_64
812.9kB of package files are needed. 2.8MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-700e-base ######################################## [100%]
Saving cache...
========================================
Installing srx-700e-data-plane-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-700e-data-plane-1.0-0@x86_64
103.7MB of package files are needed. 305.9MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-700e-data.. ######################################## [100%]
Saving cache...
========================================
Installing srx-control-plane-1.0-0-15.1.x86_64.rpm ...
========================================
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
srx-control-plane-1.0-0@x86_64
325.6MB of package files are needed. 325.5MB will be used.
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing srx-control-p.. ######################################## [100%]
Output from srx-control-plane-1.0-0@x86_64:
-------------------------------
Installing JUNOS image: junos-srxjcp-15.1X49-D50.3-domestic.img.gz
-------------------------------
Extracting junos-srxjcp-15.1X49-D50.3-domestic.img.gz to /recovery/junos/junos-srxjcp-15.1X49-D50.3-domestic-201606160744.img
Switching active Junos to /recovery/junos/junos-srxjcp-15.1X49-D50.3-domestic-201606160744.img
/var/tmp/rpm-tmp.67533: line 292: /usr/sbin/copy-dst2varplatform: No such file or directory
Saving cache...
[ OK ] Application installed.
/
saving the image for rollback
---------------------------------------------
[ OK ] Installation for Junos
Rebooting the system to complete the installation
---------------------------------------------
/usr/sbin/virt-what: line 85: /usr/sbin/virt-what-Stopping OpenBSD Secure Shell server: sshdno /usr/sbin/sshd found; none killed
Stopping Advanced Configuration and Power Interface daemon: no /usr/sbin/acpid found; none killed
acpid.
Stopping domain name service: named.
Stopping system message bus: dbus.
stopping DNS forwarder and DHCP server: dnsmasq... no /usr/bin/dnsmasq found; none killed
Shutting down irqbalance: no irqbalance found; none killed
done
stopping mountd: done
stopping nfsd: done
stopping rsyslogd ... done
Stopping internet superserver: xinetd.
stopping statd: done
Clearing ebtables rulesets: filter nat broute done. ok
Stopping crond: FAIL
Stopping rpcbind daemon...
not running.
* Stopping virtualization library daemon: libvirtd [fail]
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
done.
Stopping tcsd: FAIL
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting remote filesystems...
Stopping portmap daemon...
Deactivating swap...
Unmounting local filesystems...
Rebooting... LPC-DRV: reboot notifier called with 0x0001
Restarting system.
U
3h
3h
3h
InsydeH2O version : SRXS_SFP_00.26_00.01
BIOS Build Date : 11/06/2015
System Memory Speed : 1600 MHz
Processor Type : Intel(R) Xeon(R) CPU @ 2.50GHz
CPUID : 306A9
Secure boot is enforced
Press Esc for boot options
Now booting : EFI HDD Device (TS16DSTMM1600)
Juniper CMOS BootOrder Value Before Incrementing: 0x023F
Juniper CMOS BootOrder Value After Incrementing: 0x033F
Welcome to GRUB!
Secure Grub2 Diskboot
error: can't find command `serial'.
error: terminal `serial' isn't found.
error: terminal `serial' isn't found.
GNU GRUB version 2.02~juniper/rel_v3~
/----------------------------------------------------------------------------\
|*Juniper Linux |
| Juniper Linux Debug |
| Juniper-Linux-Recovery |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `Juniper Linux'
Loading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
igb 0000:07:00.3: Hardware Initialization Failure
Mounting boot device LABEL=LINUX-BOOT
Unpacking initrd.cpio.gz ....
1096751 blocks
Unmount boot device LABEL=LINUX-BOOT
INIT: version 2.88 booting
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5
cpld i2c mapped 0x22582010
cpld i2c number 6
running pre rc steps on SRX1500
disable_srx_boot_device
set_srx_boot_device
3 logical volume(s) in volume group "vg0_vjunos" now active
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
In init_module
In init_module - after register_chrdev
In init_module
In init_module - after register_chrdev
Starting Bootlog daemon: bootlogd.
Populating dev cache
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
kernel.core_uses_pid = 0
kernel.core_pattern = |/etc/init.d/zipcore.sh /var/tmp/corefiles/ %h.%e.%p.%t.core %e
fs.suid_dumpable = 2
vm.swappiness = 1
vm.vfs_cache_pressure = 50
INIT: Entering runlevel: 3
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Configuring network interfaces... done.
Starting rpcbind daemon...rpcbind: cannot bind * on udp: Address already in use
rpcbind: cannot bind tcp: Address already in use
done.
creating NFS state directory: done
starting statd: done
Starting Advanced Configuration and Power Interface daemon: acpid.
acpid: starting up
acpid: 1 rule loaded
acpid: waiting for events: event logging is off
Starting domain name service: namedwrote key file "/etc/bind/rndc.key"
.
starting DNS forwarder and DHCP server: dnsmasq...
dnsmasq: failed to create listening socket for port 53: Address already in use
Starting irqbalance: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting rsyslogd ... done
Starting internet superserver: xinetd.
* Starting virtualization library daemon: libvirtd
no /usr/bin/dnsmasq found; none killed [ ok ]
Starting tcsd: OK
Starting crond: OK
Checking BIOS and Synchronizing recovery capsule
Synchronizing UEFI key-store:
Junper Dev keys are not revoked. Doing nothing
Booting normal on SRX1500
/root: 5.4 GiB (5822832640 bytes) trimmed
/var: 4.3 GiB (4638838784 bytes) trimmed
/app_disk: 1.3 GiB (1346297856 bytes) trimmed
Executing application: pkg-app-junos
Initializing JUNOS Host applications
[ OK ] Application initialization.
Stopping internet superserver: xinetd.
Starting internet superserver: xinetd.
net.ipv4.ip_forward = 1
Starting SRX
Creating platform specific configurations.
mv: cannot stat '/var/tmp/corefiles/*': No such file or directory
ifup: interface eth0 already configured
add map loop0p1 (252:3): 0 62500 linear /dev/loop0 1
add map loop0p2 (252:4): 0 187500 linear /dev/loop0 62501
/etc/init.d/rc.junosapp: line 251: [: 17G: integer expression expected
20+0 records in
20+0 records out
20 bytes (20 B) copied, 0.000334551 s, 59.8 kB/s
4+0 records in
4+0 records out
4 bytes (4 B) copied, 0.000322997 s, 12.4 kB/s
7+0 records in
7+0 records out
7 bytes (7 B) copied, 0.000324607 s, 21.6 kB/s
stopping idmapd: done
stopping statd: done
creating NFS state directory: done
starting statd: done
starting idmapd: rpc.idmapd: libnfsidmap: requested translation method, 'nsswitch', is not available
rpc.idmapd: Unable to create name to user id mappings.
done
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
kdump: unrecognized service
Starting OpenBSD Secure Shell server: sshd
/usr/sbin/sshd is already running
2024
starting rsyslogd ... done
Starting internet superserver: xinetd.
sntpc: unrecognized service
Starting crond: FAIL
watchdog: unrecognized service
Starting lcmd: [ OK ]
Starting vehostd: [ OK ]
Starting monit: Generated unique Monit id 6d80d44863840eebaaf1f580dae6dc27 and stored to '/root/.monit.id'
Starting monit daemon with http interface at [localhost:2812]
Monit start delay set -- pause for 60s
[ OK ]
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
Processing file: /etc/dh89xxcc_qa_dev0.conf
Stopping Bootlog daemon: bootlogd.
Consoles: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
BIOS 639kB/1999864kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.2
(builder@ralenth.juniper.net, Sat May 28 19:03:37 2016)
Loading /boot/defaults/loader.conf
/kernel text=0xa68a64 data=0x63b3c+0x11fc78 syms=[0x4+0xb58d0+0x4+0x10a928]
/boot/modules/libmbpool.ko text=0xce8 data=0x114 /
/boot/modules/if_em_vsrx.ko text=0x1869c data=0x840+0x1a4 -
/boot/modules/virtio.ko text=0x2168 data=0x208 syms=[0x4+0x7f0+0x4+0x972]
/boot/modules/virtio_pci.ko text=0x2de8 data=0x200+0x8 syms=[0x4+0x900+0x4+0xb22]
/boot/modules/virtio_blk.ko text=0x299c data=0x1dc+0xc syms=[0x4+0x970+0x4+0xa0f]
/boot/modules/if_vtnet.ko text=0x616c data=0x354+0x10 syms=[0x4+0xe20+0x4+0xf2f]
/boot/modules/pci_hgcomm.ko text=0x12fc data=0x1a4+0x44 syms=[0x4+0x570+0x4+0x61d]
/boot/modules/pvi_db.ko text=0x27f8 data=0x315+0x2f syms=[0x4+0x610+0x4+0x5be]
/boot/modules/chassis.ko text=0x9bc data=0x1d3+0x11 syms=[0x4+0x3a0+0x4+0x399]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
platform_early_bootinit: Early Boot Initialization
tvp mode is true jnx_reboot_reason: 16384
mac base ff:ff:ff:ff:ff:ff len 255
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:23:47 UTC
builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/i386/junos/bsd/kernels/SRXJCP/kernel
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: QEMU Virtual CPU version 1.5.0 (2500.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x781abfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,PAT,MMX,FXSR,SSE,SSE2>
Features2=0x80800001<SSE3,POPCNT,<b31>>
real memory = 2048917504 (1954 MB)
avail memory = 1387745280 (1323 MB)
ACPI APIC Table: <BOCHS BXPCAPIC>
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Initializing SRXTVP platform properties ..
pci-hgcomdev module loadedacpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc200-0xc20f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, USB> at device 1.2 (no driver attached)
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc1a0-0xc1bf mem 0xfebe0000-0xfebe0fff irq 11 at device 3.0 on pci0
em0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci1: <VirtIO PCI Network adapter> port 0xc1c0-0xc1df mem 0xfebe1000-0xfebe1fff irq 11 at device 4.0 on pci0
em1: <VirtIO Networking Adapter> on virtio_pci1
virtio_pci1: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci1: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci2: <VirtIO PCI Network adapter> port 0xc1e0-0xc1ff mem 0xfebe2000-0xfebe2fff irq 10 at device 5.0 on pci0
em2: <VirtIO Networking Adapter> on virtio_pci2
virtio_pci2: host features: 0x719fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,0x800000,RxModeExtra,VLanFilter,RxMode,ControlVq,Sta>
virtio_pci2: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci3: <VirtIO PCI Block adapter> port 0xc000-0xc03f mem 0xfebe3000-0xfebe3fff irq 10 at device 6.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000cd4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,SCSICmds,BlockSize,DiskGeometry,MaxNu>
virtio_pci3: negotiated features: 0x10000054 <RingIndirect,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 509MB (1044288 512 byte sectors)
virtio_pci4: <VirtIO PCI Block adapter> port 0xc040-0xc07f mem 0xfebe4000-0xfebe4fff irq 11 at device 7.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci4
virtio_pci4: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci4: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 16384MB (33554432 512 byte sectors)
virtio_pci5: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xfebe5000-0xfebe5fff irq 11 at device 8.0 on pci0
vtblk2: <VirtIO Block Adapter> on virtio_pci5
virtio_pci5: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci5: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk2: 102MB (209715 512 byte sectors)
virtio_pci6: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xfebe6000-0xfebe6fff irq 10 at device 9.0 on pci0
vtblk3: <VirtIO Block Adapter> on virtio_pci6
virtio_pci6: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci6: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk3: 128MB (262144 512 byte sectors)
virtio_pci7: <VirtIO PCI Block adapter> port 0xc100-0xc13f mem 0xfebe7000-0xfebe7fff irq 10 at device 10.0 on pci0
vtblk4: <VirtIO Block Adapter> on virtio_pci7
virtio_pci7: host features: 0x71000ed4 <EventIdx,RingIndirect,NotifyOnEmpty,0x800,Topology,FlushCmd,SCSICmds,BlockSize,DiskGeome>
virtio_pci7: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk4: 614MB (1259059 512 byte sectors)
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc140-0xc17f mem 0xfebc0000-0xfebdffff irq 11 at device 16.0 0
em3: Memory Access and/or Bus Master bits were not set!
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebe8000-0xfebe83ff irq 10 at device 17.0 on pci0
usb0: EHCI version 1.0
usb0: <EHCI (generic) USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
hgcommdev0: <HGCOMMDEV For Host VM communication> mem 0xfebe9000-0xfebe9fff at device 22.0 on pci0
hgcommdev0: hgcommdev: registers at 0xf606c000
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROM> at iomem 0xe5800-0xeffff on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: MDA <16 virtual consoles, flags=0x300>
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
TVP: Model Name read from HostOS is srx1500
Initializing product: 192 ..
fxp0: bus=0, device=16, func=0, Ethernet address 44:f4:77:40:35:8a
Timecounter "TSC" frequency 2500012840 Hz quality 800
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Loading JUNOS chassis module
chassis_init_hw_chassis_startup_time: chassis startup time 0.000000
Kernel thread "wkupdaemon" (pid 54) exited prematurely.
Trying to mount root from ufs:/dev/vtbd0s1a
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md0...
Automatic reboot in progress...
** /dev/vtbd0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 87227 free (3 frags, 21806 blocks, 0.0% fragmentation)
Verified junos signed by PackageProductionEc_2016 method ECDSA256+SHA256
Verified jboot signed by PackageProductionEc_2016 method ECDSA256+SHA256
veriexec: cannot update veriexec for /sbin/preinit: Too many links
Verified junos-srxjcp-15.1X49-D50.3-domestic signed by PackageProductionEc_2016 method ECDSA256+SHA256
Detected data disk
** /dev/vtbd1s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 825449 free (25 frags, 103178 blocks, 0.0% fragmentation)
** /dev/vtbd1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 6742524 free (276 frags, 842781 blocks, 0.0% fragmentation)
remount /config...success
remount /var...success
Initialize /var subdirs...
Mounting shared partition /var/host ..
Detected swap drive
*** Creating PVIDb..\n
849+0 records in
849+0 records out
441480 bytes transferred in 0.064506 secs (6844009 bytes/sec)
hw.re.gres_sync_other: 0 -> 1
hw.re.gres_sync_other: 1 -> 0
vmguest: setup ...
vmguest: Found smbios variables, skipping reboot.
Loading configuration ...
mgd: commit complete
Setting initial options: .
Starting optional daemons: usbd.
Doing initial network setup:
.
Initial interface configuration:
kenv: unable to get vmtype
[: =: unexpected operator
additional daemons: eventd.
checking for core dump...
savecore: Reboot reason(s): 0x10: misc hardware reason
savecore: Reboot reason(s): 0x10: misc hardware reason
savecore: no dumps found
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/;
kld netpfe drv: ifpfed_ep ifpfed_esp ifpfed_ism ifpfed_ml_ha ifpfed_ppeer ifpfed_ps ifpfed_st ifpfed_vtkld platform: fileassoc id
kats kldIPsec: Initialized Security Association Processing.
resrsv.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.i386 initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
kern.timecounter.hardware: ACPI-safe -> TSC
Thu Jun 16 07:46:59 UTC 2016
Jun 16 07:46:59 init: exec_command: /usr/sbin/bfdd (PID 1400) started
Jun 16 07:46:59 init: neighbor-liveness (PID 1400) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/pppd (PID 1402) started
Jun 16 07:46:59 init: ppp (PID 1402) started
Jun 16 07:46:59 init: event-processing (PID 1162) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/l2cpd (PID 1403) started
Jun 16 07:46:59 init: l2cpd-service (PID 1403) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/oamd (PID 1404) started
Jun 16 07:46:59 init: tunnel-oamd (PID 1404) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/lfmd (PID 1405) started
Jun 16 07:46:59 init: ethernet-link-fault-management (PID 1405) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/jdhcpd (PID 1406) started
Jun 16 07:46:59 init: dhcp-service (PID 1406) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/authd (PID 1407) started
Jun 16 07:46:59 init: general-authentication-service (PID 1407) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/mplsoamd (PID 1408) started
Jun 16 07:46:59 init: mpls-traceroute (PID 1408) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/bdbrepd (PID 1409) started
Jun 16 07:46:59 init: database-replication (PID 1409) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sendd (PID 1410) started
Jun 16 07:46:59 init: secure-neighbor-discovery (PID 1410) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/smid (PID 1411) started
Jun 16 07:46:59 init: subscriber-management (PID 1411) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/shm-rtsdbd (PID 1412) started
Jun 16 07:46:59 init: shm-rtsdbd (PID 1412) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/gstatd (PID 1413) started
Jun 16 07:46:59 init: gstatd (PID 1413) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nfsd (PID 1414) started
Jun 16 07:46:59 init: nfsd-service (PID 1414) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/jsrpd (PID 1415) started
Jun 16 07:46:59 init: jsrp-service (PID 1415) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nsd (PID 1416) started
Jun 16 07:46:59 init: network-security (PID 1416) started
Jun 16 07:46:59 init: exec_command: /etc/mount-crash (PID 1417) started
Jun 16 07:46:59 init: mount_crash (PID 1417) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sdk-vmmd (PID 1418) started
Jun 16 07:46:59 init: app-engine-virtual-machine-management-service (PID 1418) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/tnp.sntpd (PID 1419) started
Jun 16 07:46:59 init: sntp-iri4 (PID 1419) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/inetd (PID 1421) started
Jun 16 07:46:59 init: ftp-inet-process (PID 1421) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/pkid (PID 1424) started
Jun 16 07:46:59 init: pki-service (PID 1424) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/httpd-gk (PID 1425) started
Jun 16 07:46:59 init: web-management (PID 1425) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/mountd (PID 1426) started
Jun 16 07:46:59 init: mountd-service (PID 1426) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/appidd (PID 1427) started
Jun 16 07:46:59 init: application-identification (PID 1427) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/appsecured (PID 1428) started
Jun 16 07:46:59 init: application-security (PID 1428) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/idpd (PID 1429) started
Jun 16 07:46:59 init: idp-policy (PID 1429) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/ipfd (PID 1430) started
Jun 16 07:46:59 init: security-intelligence (PID 1430) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/aamwd (PID 1431) started
Jun 16 07:46:59 init: advanced-anti-malware (PID 1431) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/nstraced (PID 1432) started
Jun 16 07:46:59 init: network-security-trace (PID 1432) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/rtlogd (PID 1433) started
Jun 16 07:46:59 init: security-log (PID 1433) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/utmd (PID 1434) started
Jun 16 07:46:59 init: utmd (PID 1434) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/sysctlrelayd (PID 1435) started
Jun 16 07:46:59 init: sysctl-relay-process (PID 1435) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/xntpd (PID 1436) started
Jun 16 07:46:59 init: ntpd-service (PID 1436) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/syshmd (PID 1437) started
Jun 16 07:46:59 init: system-health-management (PID 1437) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/smtpd (PID 1438) started
Jun 16 07:46:59 init: simple-mail-client-service (PID 1438) started
Jun 16 07:46:59 init: can not access /usr/sbin/ipmid: No such file or directory
Jun 16 07:46:59 init: ipmi (PID 0) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/wmic (PID 1439) started
Jun 16 07:46:59 init: jnx-wmicd-service (PID 1439) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/webapid (PID 1440) started
Jun 16 07:46:59 init: webapi-service (PID 1440) started
Jun 16 07:46:59 init: exec_command: /usr/sbin/license-check (PID 1441) started
Jun 16 07:46:59 init: license-service (PID 1441) started
Jun 16 07:47:00 init: exec_command: /usr/sbin/sdxd (PID 1443) started
Jun 16 07:47:00 init: service-deployment (PID 1443) started
Jun 16 07:47:00 init: Starting of initial processes complete
Amnesiac (ttyd0)
login:
Комментариев нет:
Отправить комментарий