U-Boot 1.1.6 (Jun 10 2011 - 00:50:30)
CPU: 8572, Version: 2.1, (0x80e00021)
Core0: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU0:1333 MHz, CPU1:1333 MHz, CCB: 533 MHz,
DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC: 33 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: MX10-T 1.8
CPLD: Version 0x1f
DRAM: Initializing - DDR: 2048 MB
Testing DRAM from 0x00000000 to 0x80000000
DRAM test phase 1:
DRAM test phase 2:
DRAM test passed.
Now running in RAM - U-Boot at: 0ffa0000
Enable CPLD Watchdog
POST: U-boot memory location PASSED
Scaning PCIE bus:
Scanning PCI Express` Bus .. for bus 0
Found(0.0.0), (0x1957,0x41) Class(0xb20) :MPC8572 PCIE Controller
BAR0 = 0xc0000000
Scanning PCI Express` Bus .. for bus 1
Found(1.0.0), (0x10b5,0x8112) Class(0x604) :PEX8112 PCIe-to-PCI Bridge
BAR0 = 0xc0100000 BAR1 = 0x0
Scanning PCI Express` Bus .. for bus 2
Found(2.1.0), (0x1033,0x35) Class(0xc03) :uPD720101/2 USB(OHCI) Controller
BAR0 = 0xc0200000
Found(2.1.1), (0x1033,0xe0) Class(0xc03) :uPD720101/2 USB(EHCI) Controller
BAR0 = 0xc0201000
----------- PCIE scan complete, last bus = 2 ------------
FLASH: 8 MB
L2 cache 1MB: enabled
In: serial
Out: serial
Err: serial
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Net: fxp0: PHY is Marvell 88E1112S (1410c97)
me0, em0, fxp0 [PRIME], em1
ELF file is 32 bit
Loading .text @ 0x00010080 (184508 bytes)
Loading .rodata @ 0x0003d13c (14008 bytes)
Loading .rodata.str1.4 @ 0x000407f4 (16288 bytes)
Loading set_Xcommand_set @ 0x00044794 (92 bytes)
Loading .rodata.cst4 @ 0x000447f0 (12 bytes)
Loading .data @ 0x00045000 (13944 bytes)
Loading .sdata @ 0x00048678 (80 bytes)
Clearing .sbss @ 0x000486c8 (264 bytes)
Clearing .bss @ 0x000487d0 (9296 bytes)
## Starting application at 0x00010080 ...
Consoles: U-Boot console
Will try to boot from
USB
nand-flash0
nand-flash1
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(bharanis@svl-junos-pool20.juniper.net, Fri Jun 10 00:52:46 PDT 2011)
Memory: 2048MB
Trying to boot from nand-flash0
Loading /boot/defaults/loader.conf
/boot/installer data=0x77cb0c+0x95bd8 syms=[0x4+0x6ddd0+0x4+0xa6280]
/
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/boot/installer]...
Kernel entry at 0xa00000c0 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
platform_early_bootinit: MX-PPC Series Early Boot Initialization
mxppc_set_re_type: hw.board.type is MX10-T
mxppc_set_re_type: REtype:125, model:mx10-t, model:MX10-T, i2cid:1365
WDOG initialized
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R4.6 #0: 2016-06-23 21:01:56 UTC
builder@mayland.juniper.net:/volume/build/junos/15.1/release/15.1R4.6/obj/powerpc/junos/bsd/kernels/MFS-PPC/kernel
Timecounter "decrementer" frequency 66666666 Hz quality 0
cpu0: Freescale e500v2 core revision 3.0
cpu0: HID0 80004000<EMCP,TBEN>
real memory = 2100297728 (2003 MB)
avail memory = 2059784192 (1964 MB)
ETHERNET SOCKET BRIDGE initialising
Initializing M/T/EX platform properties ..
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0
uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 20,21,22,24 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
tbbcpld0 iomem 0xff700000-0xff7fffff on lbc0
tbbcpld_attach: 1st IRQ alloc; start:4 end:4 flags:7
tbbcpld_attach: 2st IRQ alloc; start:6 end:6 flags:7
uart2: <16750 or compatible> iomem 0xff600000-0xff600007 on lbc0
uart3: <16750 or compatible> iomem 0xff500000-0xff500007 on lbc0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0
ds1672 rtc0: <DS1672 RTC> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xf7f03100-0xf7f03114 irq 59 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 02:00:00:00:00:0b
miibus0: <MII bus> on tsec0
gentbi0: <Generic ten-bit interface> on miibus0
gentbi0: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0
tsec1: hardware MAC address 02:00:00:00:00:04
miibus1: <MII bus> on tsec1
gentbi1: <Generic ten-bit interface> on miibus1
gentbi1: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec2: <eTSEC ethernet controller> iomem 0xf7f26000-0xf7f26fff irq 47,48,49 on ocpbus0
tsec2: hardware MAC address 64:87:88:5d:cb:f7
miibus2: <MII bus> on tsec2
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus2
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
tsec3: <eTSEC ethernet controller> iomem 0xf7f27000-0xf7f27fff irq 53,54,55 on ocpbus0
tsec3: hardware MAC address 02:00:02:00:00:04
miibus3: <MII bus> on tsec3
gentbi2: <Generic ten-bit interface> on miibus3
gentbi2: 1000baseSX-FDX, 1000baseT-FDX, auto
pcib0: <Freescale MPC8572 PCI Express host controller> iomem 0xf7f09000-0xf7f09fff,0xe8000000-0xebffffff on ocpbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> mem 0xe8000000-0xe80fffff at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xe8100000-0xe810ffff irq 0 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <serial bus, USB> at device 1.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xe8200000-0xe82000ff irq 21 at device 1.1 on pci2
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: ATP Electronics ATP IG eUSB SSD, rev 2.00/11.00, addr 2
umass1: UNIGEN QYR4000F4, rev 2.00/1.00, addr 3
Initializing product: 121 ..
platform_cookie_read not implemented
Initializing MX-PPC platform mastership..
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </boot/modules/mdimg> 24334848 bytes at 0xa092673c
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <UNIGEN QYR4000F4 PMAP> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ATP ATP IG eUSB SSD 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
Kernel thread "wkupdaemon" (pid 50) exited prematurely.
Trying to mount root from cd9660:/dev/md0
Disabling watchdog
=================== Bootstrap installer starting ===================
Initialized the environment
Routing engine model is RE-MX10-T
HW model is Freescale e500v2 core
Discovered that flash disk = da0 , hard disk = da1
** /dev/da0s1a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1857 files, 119989 used, 332951 free (55 frags, 41612 blocks, 0.0% fragmentation)
** /dev/da0s1e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
14 files, 16 used, 50265 free (17 frags, 6281 blocks, 0.0% fragmentation)
** /dev/da1s1a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1607 files, 99282 used, 353910 free (22 frags, 44236 blocks, 0.0% fragmentation)
** /dev/da1s1e
** Last Mounted on /mnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
3 files, 3 used, 50498 free (26 frags, 6309 blocks, 0.1% fragmentation)
** /dev/da1s1f
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
297 files, 609444 used, 810588 free (292 frags, 101287 blocks, 0.0% fragmentation)
Disk to install is da0
mfs: available=3952048
hw.physmem: 2139095040
hw.usermem: 2089455616
hw.realmem: 2100297728
Using 3952048 for /tmp
Partitioning da0 ...
******* Working on device /dev/da0 *******
Installing disk label on da0s1
Running newfs on da0s1a...
/dev/da0s1a: 899.2MB (1841556 sectors) block size 16384, fragment size 2048
using 5 cylinder groups of 183.62MB, 11752 blks, 23552 inodes.
super-block backups (for fsck -b #) at:
32, 376096, 752160, 1128224, 1504288
Running newfs on da0s1e...
/dev/da0s1e: 99.9MB (204616 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 24.98MB, 1599 blks, 3200 inodes.
super-block backups (for fsck -b #) at:
32, 51200, 102368, 153536
Clearing the last sector of da0s1a...
Clearing the last sector of da0s1e...
Installing JUNOS on da0...
Adding jbase...
Mounted jbase on /mnt/packages/mnt/jbase (/dev/md2)
Restoring backed up configurations...
Adding jbundle-ppc-15.1R4.6-domestic.tgz...
Checking package integrity...
Running requirements check first for jbundle-ppc-15.1R4.6-domestic...
Running pre-install for jbundle-ppc-15.1R4.6-domestic...
Installing jbundle-ppc-15.1R4.6-domestic in /var/tmp/jbundle-ppc-15.1R4.6-domestic.tgz.1...
Running post-install for jbundle-ppc-15.1R4.6-domestic...
Verified SHA1 checksum of jbase-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jboot-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jcrypto-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jdocs-15.1R4.6.tgz
Verified SHA1 checksum of jkernel-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jmacsec-15.1R4.6.tgz
Verified SHA1 checksum of jpfe-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jroute-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jservices-crypto-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jservices-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jweb-ppc-15.1R4.6.tgz
Adding jcrypto-ppc...
Adding jpfe-ppc...
Adding jweb-ppc...
Adding jdocs...
Adding jservices-ppc...
Installing new jservices-alg ...
Verified jservices-alg-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-alg-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-alg-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-alg-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-alg ...
Storing jservices-alg-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-alg/jservices-alg-xlp64 -> /var/sw/pkg/jservices-alg-xlp64-15.1R4.6.tgz...
Installing new jservices-jflow ...
Verified jservices-jflow-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-jflow-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-jflow-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-jflow-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-jflow ...
Storing jservices-jflow-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-jflow/jservices-jflow-xlp64 -> /var/sw/pkg/jservices-jflow-xlp64-15.1R4.6.tgz...
Installing new jservices-sfw ...
Verified jservices-sfw-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-sfw-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-sfw-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-sfw-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-sfw ...
Storing jservices-sfw-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-sfw/jservices-sfw-xlp64 -> /var/sw/pkg/jservices-sfw-xlp64-15.1R4.6.tgz...
Installing new jservices-nat ...
Verified jservices-nat-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-nat-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-nat-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-nat-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-nat ...
Storing jservices-nat-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-nat/jservices-nat-xlp64 -> /var/sw/pkg/jservices-nat-xlp64-15.1R4.6.tgz...
Installing new jservices-rpm ...
Verified jservices-rpm-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-rpm-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-rpm-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-rpm-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-rpm ...
Storing jservices-rpm-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-rpm/jservices-rpm-xlp64 -> /var/sw/pkg/jservices-rpm-xlp64-15.1R4.6.tgz...
Installing new jservices-cpcd ...
Verified jservices-cpcd-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-cpcd-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-cpcd-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-cpcd-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-cpcd ...
Storing jservices-cpcd-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-cpcd/jservices-cpcd-xlp64 -> /var/sw/pkg/jservices-cpcd-xlp64-15.1R4.6.tgz...
Adding jmacsec...
Adding jservices-crypto-ppc...
Installing new jservices-crypto-base ...
Verified jservices-crypto-base-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-crypto-base-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-crypto-base-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-crypto-base-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-crypto-base ...
Storing jservices-crypto-base-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-crypto-base/jservices-crypto-base-xlp64 -> /var/sw/pkg/jservices-crypto-base-xlp64-15.1R4.6.tgz...
Installing new jservices-ipsec ...
Verified jservices-ipsec-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-ipsec-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-ipsec-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-ipsec-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-ipsec ...
Storing jservices-ipsec-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-ipsec/jservices-ipsec-xlp64 -> /var/sw/pkg/jservices-ipsec-xlp64-15.1R4.6.tgz...
Adding jkernel-ppc...
Adding jroute-ppc...
Unmounted /mnt/packages/mnt/jbase
machdep.bootsuccess: 0 -> 1
machdep.nextbootdev: usb -> nand-flash0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
syncing disks... All buffers synced.
Uptime: 6m4s
Rebooting...
I2C: ready
U-Boot 1.1.6 (Jun 10 2011 - 00:50:30)
CPU: 8572, Version: 2.1, (0x80e00021)
Core0: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU0:1333 MHz, CPU1:1333 MHz, CCB: 533 MHz,
DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC: 33 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: MX10-T 1.8
CPLD: Version 0x1f
DRAM: Initializing - DDR: 2048 MB
Testing DRAM from 0x00000000 to 0x80000000
DRAM test phase 1:
DRAM test phase 2:
DRAM test passed.
Now running in RAM - U-Boot at: 0ffa0000
Enable CPLD Watchdog
POST: U-boot memory location PASSED
Scaning PCIE bus:
Scanning PCI Express` Bus .. for bus 0
Found(0.0.0), (0x1957,0x41) Class(0xb20) :MPC8572 PCIE Controller
BAR0 = 0xc0000000
Scanning PCI Express` Bus .. for bus 1
Found(1.0.0), (0x10b5,0x8112) Class(0x604) :PEX8112 PCIe-to-PCI Bridge
BAR0 = 0xc0100000 BAR1 = 0x0
Scanning PCI Express` Bus .. for bus 2
Found(2.1.0), (0x1033,0x35) Class(0xc03) :uPD720101/2 USB(OHCI) Controller
BAR0 = 0xc0200000
Found(2.1.1), (0x1033,0xe0) Class(0xc03) :uPD720101/2 USB(EHCI) Controller
BAR0 = 0xc0201000
----------- PCIE scan complete, last bus = 2 ------------
FLASH: 8 MB
L2 cache 1MB: enabled
In: serial
Out: serial
Err: serial
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Net: fxp0: PHY is Marvell 88E1112S (1410c97)
me0, em0, fxp0 [PRIME], em1
ELF file is 32 bit
Loading .text @ 0x00010080 (184508 bytes)
Loading .rodata @ 0x0003d13c (14008 bytes)
Loading .rodata.str1.4 @ 0x000407f4 (16288 bytes)
Loading set_Xcommand_set @ 0x00044794 (92 bytes)
Loading .rodata.cst4 @ 0x000447f0 (12 bytes)
Loading .data @ 0x00045000 (13944 bytes)
Loading .sdata @ 0x00048678 (80 bytes)
Clearing .sbss @ 0x000486c8 (264 bytes)
Clearing .bss @ 0x000487d0 (9296 bytes)
## Starting application at 0x00010080 ...
Consoles: U-Boot console
Will try to boot from
USB
nand-flash0
nand-flash1
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(bharanis@svl-junos-pool20.juniper.net, Fri Jun 10 00:52:46 PDT 2011)
Memory: 2048MB
Trying to boot from nand-flash0
Loading /boot/defaults/loader.conf
/kernel data=0xb9b65c+0xcb8d4 syms=[0x4+0x9f2b0+0x4+0xeae21]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0xa00000c0 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
platform_early_bootinit: MX-PPC Series Early Boot Initialization
mxppc_set_re_type: hw.board.type is MX10-T
mxppc_set_re_type: REtype:125, model:mx10-t, model:MX10-T, i2cid:1365
WDOG initialized
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R4.6 #0: 2016-06-23 21:32:58 UTC
builder@mayland.juniper.net:/volume/build/junos/15.1/release/15.1R4.6/obj/powerpc/junos/bsd/kernels/JUNIPER-PPC/kernel
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
Timecounter "decrementer" frequency 66666666 Hz quality 0
cpu0: Freescale e500v2 core revision 3.0
cpu0: HID0 80004000<EMCP,TBEN>
real memory = 2118123520 (2020 MB)
avail memory = 2077224960 (1980 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing M/T/EX platform properties ..
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0
uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 20,21,22,24 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
tbbcpld0 iomem 0xff700000-0xff7fffff on lbc0
tbbcpld_attach: 1st IRQ alloc; start:4 end:4 flags:7
tbbcpld_attach: 2st IRQ alloc; start:6 end:6 flags:7
uart2: <16750 or compatible> iomem 0xff600000-0xff600007 on lbc0
uart3: <16750 or compatible> iomem 0xff500000-0xff500007 on lbc0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0
ds1672 rtc0: <DS1672 RTC> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xf7f03100-0xf7f03114 irq 59 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 02:00:00:00:00:0b
miibus0: <MII bus> on tsec0
gentbi0: <Generic ten-bit interface> on miibus0
gentbi0: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0
tsec1: hardware MAC address 02:00:00:00:00:04
miibus1: <MII bus> on tsec1
gentbi1: <Generic ten-bit interface> on miibus1
gentbi1: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec2: <eTSEC ethernet controller> iomem 0xf7f26000-0xf7f26fff irq 47,48,49 on ocpbus0
tsec2: hardware MAC address 64:87:88:5d:cb:f7
miibus2: <MII bus> on tsec2
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus2
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
tsec3: <eTSEC ethernet controller> iomem 0xf7f27000-0xf7f27fff irq 53,54,55 on ocpbus0
tsec3: hardware MAC address 02:00:02:00:00:04
miibus3: <MII bus> on tsec3
gentbi2: <Generic ten-bit interface> on miibus3
gentbi2: 1000baseSX-FDX, 1000baseT-FDX, auto
pcib0: <Freescale MPC8572 PCI Express host controller> iomem 0xf7f09000-0xf7f09fff,0xe8000000-0xebffffff on ocpbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> mem 0xe8000000-0xe80fffff at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xe8100000-0xe810ffff irq 0 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <serial bus, USB> at device 1.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xe8200000-0xe82000ff irq 21 at device 1.1 on pci2
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: ATP Electronics ATP IG eUSB SSD, rev 2.00/11.00, addr 2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
umass1: UNIGEN QYR4000F4, rev 2.00/1.00, addr 3
umass1: SCSI over Bulk-Only; quirks = 0x0000
umass1:1:1:-1: Attached to scbus1
Initializing product: 121 ..
Setting up M/T interface operations and attributes
platform_cookie_read not implemented
Initializing MX-PPC platform mastership..
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <UNIGEN QYR4000F4 PMAP> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ATP ATP IG eUSB SSD 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
Kernel thread "wkupdaemon" (pid 56) exited prematurely.
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProductionEc_2016
Verified jboot signed by PackageProductionEc_2016
Verified jbase-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jkernel package on /dev/md1...
Verified manifest signed by PackageProductionEc_2016
Verified jkernel-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jpfe package on /dev/md2...
Verified manifest signed by PackageProductionEc_2016
Verified jpfe-MX80-15.1R4.6 signed by PackageProductionEc_2016
Mounted jdocs package on /dev/md3...
Verified manifest signed by PackageProductionEc_2016
Verified jdocs-15.1R4.6 signed by PackageProductionEc_2016
Mounted jroute package on /dev/md4...
Verified manifest signed by PackageProductionEc_2016
Verified jroute-ppc-15.1R4.6 signed by PackageProductionEc_2016
Executing /packages/mnt/jroute-ppc-15.1R4.6/mount.post..
Mounted jcrypto package on /dev/md5...
Verified manifest signed by PackageProductionEc_2016
Verified jcrypto-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jmacsec package on /dev/md6...
Verified manifest signed by PackageProductionEc_2016
Verified jmacsec-15.1R4.6 signed by PackageProductionEc_2016
Mounted jweb package on /dev/md7...
Verified manifest signed by PackageProductionEc_2016
Verified jweb-ppc-15.1R4.6 signed by PackageProductionEc_2016
Executing /packages/mnt/jweb-ppc-15.1R4.6/mount.post..
swapon: adding /dev/da0s1b as swap device
Automatic reboot in progress...
** Last Mounted on /mnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1861 files, 114511 used, 338429 free (29 frags, 42300 blocks, 0.0% fragmentation)
** Last Mounted on /mnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
14 files, 16 used, 50265 free (17 frags, 6281 blocks, 0.0% fragmentation)
** Last Mounted on /mnt/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
315 files, 652821 used, 767211 free (275 frags, 95867 blocks, 0.0% fragmentation)
** /dev/da1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 767211 free (275 frags, 95867 blocks, 0.0% fragmentation)
tunefs: soft updates remains unchanged as disabled
chown: wheel: Invalid argument
Creating initial configuration...mgd: warning: schema: init: 'logical-systems-vlans' contains-node 'juniper-config vlans': not found
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
checking for core dump...
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /modules/peertype;/modules/ifpfLoading the IMA Link Media Layer; Attaching to media services layer
Loading the IMA Group Media Layer; Attaching to media services layer
e_drv;/modules/ifpfe_media;/modules/platform;/moLoading the SONET Media Layer; Attaching to media services layer
dules;
kld netpfe media: ifpfem_ds0 ifpfem_ds1e1 ifpfem_ds3e3 iLoading the CHMIC module
fpfem_ima ifpfem_otn ifpfem_sonetkld netpfe drv: ifpfed_atm ifpfed_chmic ifpfed_controller ifpfed_ds0 ifpfed_ds1interface ifpfed_eth.1 already present in the KLD 'kernel'!
e1 ifpfed_ds3e3 ifpfed_ethkldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error
ifpfed_irb ifpfed_lt ifpfed_Loading POS driver
ml_cmn ifpfed_ml_ha ifpfed_pos ifpfed_pppoe ifpfed_ps ifpfed_sa Loading Aggregate sonet driver
ifpfed_svcs ifpfed_vtkld platform: mt_ifpfeLoading Multilink Services PICs module.
Loading the M&T Platform NETPFE module
kld peertype: peertype_asp peertype_msp peertype_slavere peertype_xdpc ipsec kldcryptosoft0: <software crypto> on nexus0
kats kldIPsec: Initialized Security Association Processing.
.
Doing additional network setup:.Loading JUNOS chassis module
chassis_init_hw_chassis_startup_time: chassis startup time 0.000000
Starting final network daemons:.
chassis.ko loaded setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.powerpc initialization:.
Lock Manager
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved.
Unix Domain sockets Lock manager
Lock manager 'lockmgr' started successfully.
Database Initialization Utility
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved.
/var/pdb/profile_db initialized
Profile database initialized
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Mon Jul 11 08:32:27 UTC 2016
JJJJJJJ
Amnesiac (ttyu0)
login: Jul 11 08:32:37 init: exec_command: /usr/sbin/oamd (PID 1714) started
Jul 11 08:32:37 init: tunnel-oamd (PID 1714) started
Jul 11 08:32:37 init: exec_command: /usr/sbin/lfmd (PID 1715) started
Jul 11 08:32:37 init: ethernet-link-fault-management (PID 1715) started
Jul 11 08:32:38 init: dhcp-service (PID 1583) sending signal usr2: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: general-authentication-service (PID 1584) sending signal usr1: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: exec_command: /usr/sbin/cfmd (PID 1716) started
Jul 11 08:32:38 init: ethernet-connectivity-fault-management (PID 1716) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/mplsoamd (PID 1717) started
Jul 11 08:32:38 init: mpls-traceroute (PID 1717) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/sendd (PID 1718) started
Jul 11 08:32:38 init: secure-neighbor-discovery (PID 1718) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/iccpd (PID 1719) started
Jul 11 08:32:38 init: iccp-service (PID 1719) started
Jul 11 08:32:38 init: subscriber-management (PID 1585) sending signal hup: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: stats-agent (PID 1586) terminate signal 15 sent
Jul 11 08:32:38 init: exec_command: /usr/sbin/jddosd (PID 1720) started
Jul 11 08:32:38 init: ddos-service (PID 1720) started
Jul 11 08:32:38 init: can not access /usr/sbin/gstatd: No such file or directory
Jul 11 08:32:38 init: gstatd (PID 0) started
Jul 11 08:32:38 init: can not access /usr/sbin/transportd: No such file or directory
Jul 11 08:32:38 init: transport-control (PID 0) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/agentd (PID 1721) started
Jul 11 08:32:38 init: SDN-Telemetry (PID 1721) started
CPU: 8572, Version: 2.1, (0x80e00021)
Core0: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU0:1333 MHz, CPU1:1333 MHz, CCB: 533 MHz,
DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC: 33 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: MX10-T 1.8
CPLD: Version 0x1f
DRAM: Initializing - DDR: 2048 MB
Testing DRAM from 0x00000000 to 0x80000000
DRAM test phase 1:
DRAM test phase 2:
DRAM test passed.
Now running in RAM - U-Boot at: 0ffa0000
Enable CPLD Watchdog
POST: U-boot memory location PASSED
Scaning PCIE bus:
Scanning PCI Express` Bus .. for bus 0
Found(0.0.0), (0x1957,0x41) Class(0xb20) :MPC8572 PCIE Controller
BAR0 = 0xc0000000
Scanning PCI Express` Bus .. for bus 1
Found(1.0.0), (0x10b5,0x8112) Class(0x604) :PEX8112 PCIe-to-PCI Bridge
BAR0 = 0xc0100000 BAR1 = 0x0
Scanning PCI Express` Bus .. for bus 2
Found(2.1.0), (0x1033,0x35) Class(0xc03) :uPD720101/2 USB(OHCI) Controller
BAR0 = 0xc0200000
Found(2.1.1), (0x1033,0xe0) Class(0xc03) :uPD720101/2 USB(EHCI) Controller
BAR0 = 0xc0201000
----------- PCIE scan complete, last bus = 2 ------------
FLASH: 8 MB
L2 cache 1MB: enabled
In: serial
Out: serial
Err: serial
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Net: fxp0: PHY is Marvell 88E1112S (1410c97)
me0, em0, fxp0 [PRIME], em1
ELF file is 32 bit
Loading .text @ 0x00010080 (184508 bytes)
Loading .rodata @ 0x0003d13c (14008 bytes)
Loading .rodata.str1.4 @ 0x000407f4 (16288 bytes)
Loading set_Xcommand_set @ 0x00044794 (92 bytes)
Loading .rodata.cst4 @ 0x000447f0 (12 bytes)
Loading .data @ 0x00045000 (13944 bytes)
Loading .sdata @ 0x00048678 (80 bytes)
Clearing .sbss @ 0x000486c8 (264 bytes)
Clearing .bss @ 0x000487d0 (9296 bytes)
## Starting application at 0x00010080 ...
Consoles: U-Boot console
Will try to boot from
USB
nand-flash0
nand-flash1
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(bharanis@svl-junos-pool20.juniper.net, Fri Jun 10 00:52:46 PDT 2011)
Memory: 2048MB
Trying to boot from nand-flash0
Loading /boot/defaults/loader.conf
/boot/installer data=0x77cb0c+0x95bd8 syms=[0x4+0x6ddd0+0x4+0xa6280]
/
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/boot/installer]...
Kernel entry at 0xa00000c0 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
platform_early_bootinit: MX-PPC Series Early Boot Initialization
mxppc_set_re_type: hw.board.type is MX10-T
mxppc_set_re_type: REtype:125, model:mx10-t, model:MX10-T, i2cid:1365
WDOG initialized
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R4.6 #0: 2016-06-23 21:01:56 UTC
builder@mayland.juniper.net:/volume/build/junos/15.1/release/15.1R4.6/obj/powerpc/junos/bsd/kernels/MFS-PPC/kernel
Timecounter "decrementer" frequency 66666666 Hz quality 0
cpu0: Freescale e500v2 core revision 3.0
cpu0: HID0 80004000<EMCP,TBEN>
real memory = 2100297728 (2003 MB)
avail memory = 2059784192 (1964 MB)
ETHERNET SOCKET BRIDGE initialising
Initializing M/T/EX platform properties ..
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0
uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 20,21,22,24 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
tbbcpld0 iomem 0xff700000-0xff7fffff on lbc0
tbbcpld_attach: 1st IRQ alloc; start:4 end:4 flags:7
tbbcpld_attach: 2st IRQ alloc; start:6 end:6 flags:7
uart2: <16750 or compatible> iomem 0xff600000-0xff600007 on lbc0
uart3: <16750 or compatible> iomem 0xff500000-0xff500007 on lbc0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0
ds1672 rtc0: <DS1672 RTC> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xf7f03100-0xf7f03114 irq 59 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 02:00:00:00:00:0b
miibus0: <MII bus> on tsec0
gentbi0: <Generic ten-bit interface> on miibus0
gentbi0: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0
tsec1: hardware MAC address 02:00:00:00:00:04
miibus1: <MII bus> on tsec1
gentbi1: <Generic ten-bit interface> on miibus1
gentbi1: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec2: <eTSEC ethernet controller> iomem 0xf7f26000-0xf7f26fff irq 47,48,49 on ocpbus0
tsec2: hardware MAC address 64:87:88:5d:cb:f7
miibus2: <MII bus> on tsec2
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus2
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
tsec3: <eTSEC ethernet controller> iomem 0xf7f27000-0xf7f27fff irq 53,54,55 on ocpbus0
tsec3: hardware MAC address 02:00:02:00:00:04
miibus3: <MII bus> on tsec3
gentbi2: <Generic ten-bit interface> on miibus3
gentbi2: 1000baseSX-FDX, 1000baseT-FDX, auto
pcib0: <Freescale MPC8572 PCI Express host controller> iomem 0xf7f09000-0xf7f09fff,0xe8000000-0xebffffff on ocpbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> mem 0xe8000000-0xe80fffff at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xe8100000-0xe810ffff irq 0 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <serial bus, USB> at device 1.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xe8200000-0xe82000ff irq 21 at device 1.1 on pci2
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: ATP Electronics ATP IG eUSB SSD, rev 2.00/11.00, addr 2
umass1: UNIGEN QYR4000F4, rev 2.00/1.00, addr 3
Initializing product: 121 ..
platform_cookie_read not implemented
Initializing MX-PPC platform mastership..
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </boot/modules/mdimg> 24334848 bytes at 0xa092673c
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <UNIGEN QYR4000F4 PMAP> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ATP ATP IG eUSB SSD 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
Kernel thread "wkupdaemon" (pid 50) exited prematurely.
Trying to mount root from cd9660:/dev/md0
Disabling watchdog
=================== Bootstrap installer starting ===================
Initialized the environment
Routing engine model is RE-MX10-T
HW model is Freescale e500v2 core
Discovered that flash disk = da0 , hard disk = da1
** /dev/da0s1a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1857 files, 119989 used, 332951 free (55 frags, 41612 blocks, 0.0% fragmentation)
** /dev/da0s1e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
14 files, 16 used, 50265 free (17 frags, 6281 blocks, 0.0% fragmentation)
** /dev/da1s1a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1607 files, 99282 used, 353910 free (22 frags, 44236 blocks, 0.0% fragmentation)
** /dev/da1s1e
** Last Mounted on /mnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
3 files, 3 used, 50498 free (26 frags, 6309 blocks, 0.1% fragmentation)
** /dev/da1s1f
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
297 files, 609444 used, 810588 free (292 frags, 101287 blocks, 0.0% fragmentation)
Disk to install is da0
mfs: available=3952048
hw.physmem: 2139095040
hw.usermem: 2089455616
hw.realmem: 2100297728
Using 3952048 for /tmp
Partitioning da0 ...
******* Working on device /dev/da0 *******
Installing disk label on da0s1
Running newfs on da0s1a...
/dev/da0s1a: 899.2MB (1841556 sectors) block size 16384, fragment size 2048
using 5 cylinder groups of 183.62MB, 11752 blks, 23552 inodes.
super-block backups (for fsck -b #) at:
32, 376096, 752160, 1128224, 1504288
Running newfs on da0s1e...
/dev/da0s1e: 99.9MB (204616 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 24.98MB, 1599 blks, 3200 inodes.
super-block backups (for fsck -b #) at:
32, 51200, 102368, 153536
Clearing the last sector of da0s1a...
Clearing the last sector of da0s1e...
Installing JUNOS on da0...
Adding jbase...
Mounted jbase on /mnt/packages/mnt/jbase (/dev/md2)
Restoring backed up configurations...
Adding jbundle-ppc-15.1R4.6-domestic.tgz...
Checking package integrity...
Running requirements check first for jbundle-ppc-15.1R4.6-domestic...
Running pre-install for jbundle-ppc-15.1R4.6-domestic...
Installing jbundle-ppc-15.1R4.6-domestic in /var/tmp/jbundle-ppc-15.1R4.6-domestic.tgz.1...
Running post-install for jbundle-ppc-15.1R4.6-domestic...
Verified SHA1 checksum of jbase-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jboot-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jcrypto-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jdocs-15.1R4.6.tgz
Verified SHA1 checksum of jkernel-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jmacsec-15.1R4.6.tgz
Verified SHA1 checksum of jpfe-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jroute-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jservices-crypto-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jservices-ppc-15.1R4.6.tgz
Verified SHA1 checksum of jweb-ppc-15.1R4.6.tgz
Adding jcrypto-ppc...
Adding jpfe-ppc...
Adding jweb-ppc...
Adding jdocs...
Adding jservices-ppc...
Installing new jservices-alg ...
Verified jservices-alg-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-alg-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-alg-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-alg-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-alg ...
Storing jservices-alg-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-alg/jservices-alg-xlp64 -> /var/sw/pkg/jservices-alg-xlp64-15.1R4.6.tgz...
Installing new jservices-jflow ...
Verified jservices-jflow-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-jflow-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-jflow-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-jflow-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-jflow ...
Storing jservices-jflow-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-jflow/jservices-jflow-xlp64 -> /var/sw/pkg/jservices-jflow-xlp64-15.1R4.6.tgz...
Installing new jservices-sfw ...
Verified jservices-sfw-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-sfw-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-sfw-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-sfw-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-sfw ...
Storing jservices-sfw-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-sfw/jservices-sfw-xlp64 -> /var/sw/pkg/jservices-sfw-xlp64-15.1R4.6.tgz...
Installing new jservices-nat ...
Verified jservices-nat-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-nat-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-nat-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-nat-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-nat ...
Storing jservices-nat-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-nat/jservices-nat-xlp64 -> /var/sw/pkg/jservices-nat-xlp64-15.1R4.6.tgz...
Installing new jservices-rpm ...
Verified jservices-rpm-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-rpm-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-rpm-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-rpm-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-rpm ...
Storing jservices-rpm-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-rpm/jservices-rpm-xlp64 -> /var/sw/pkg/jservices-rpm-xlp64-15.1R4.6.tgz...
Installing new jservices-cpcd ...
Verified jservices-cpcd-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-cpcd-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-cpcd-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-cpcd-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-cpcd ...
Storing jservices-cpcd-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-cpcd/jservices-cpcd-xlp64 -> /var/sw/pkg/jservices-cpcd-xlp64-15.1R4.6.tgz...
Adding jmacsec...
Adding jservices-crypto-ppc...
Installing new jservices-crypto-base ...
Verified jservices-crypto-base-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-crypto-base-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-crypto-base-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-crypto-base-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-crypto-base ...
Storing jservices-crypto-base-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-crypto-base/jservices-crypto-base-xlp64 -> /var/sw/pkg/jservices-crypto-base-xlp64-15.1R4.6.tgz...
Installing new jservices-ipsec ...
Verified jservices-ipsec-xlp64-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-ipsec-15.1R4.6.tgz signed by PackageProductionEc_2016
Verified jservices-ipsec-xlp64-15.1R4.6.tgz signed by PackageProductionRSA_2016
Verified jservices-ipsec-15.1R4.6.tgz signed by PackageProductionRSA_2016
Creating /opt/sdk/service-packages/jservices-ipsec ...
Storing jservices-ipsec-xlp64-15.1R4.6.tgz in /var/sw/pkg ...
Link: /opt/sdk/service-packages/jservices-ipsec/jservices-ipsec-xlp64 -> /var/sw/pkg/jservices-ipsec-xlp64-15.1R4.6.tgz...
Adding jkernel-ppc...
Adding jroute-ppc...
Unmounted /mnt/packages/mnt/jbase
machdep.bootsuccess: 0 -> 1
machdep.nextbootdev: usb -> nand-flash0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
syncing disks... All buffers synced.
Uptime: 6m4s
Rebooting...
I2C: ready
U-Boot 1.1.6 (Jun 10 2011 - 00:50:30)
CPU: 8572, Version: 2.1, (0x80e00021)
Core0: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU0:1333 MHz, CPU1:1333 MHz, CCB: 533 MHz,
DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC: 33 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: MX10-T 1.8
CPLD: Version 0x1f
DRAM: Initializing - DDR: 2048 MB
Testing DRAM from 0x00000000 to 0x80000000
DRAM test phase 1:
DRAM test phase 2:
DRAM test passed.
Now running in RAM - U-Boot at: 0ffa0000
Enable CPLD Watchdog
POST: U-boot memory location PASSED
Scaning PCIE bus:
Scanning PCI Express` Bus .. for bus 0
Found(0.0.0), (0x1957,0x41) Class(0xb20) :MPC8572 PCIE Controller
BAR0 = 0xc0000000
Scanning PCI Express` Bus .. for bus 1
Found(1.0.0), (0x10b5,0x8112) Class(0x604) :PEX8112 PCIe-to-PCI Bridge
BAR0 = 0xc0100000 BAR1 = 0x0
Scanning PCI Express` Bus .. for bus 2
Found(2.1.0), (0x1033,0x35) Class(0xc03) :uPD720101/2 USB(OHCI) Controller
BAR0 = 0xc0200000
Found(2.1.1), (0x1033,0xe0) Class(0xc03) :uPD720101/2 USB(EHCI) Controller
BAR0 = 0xc0201000
----------- PCIE scan complete, last bus = 2 ------------
FLASH: 8 MB
L2 cache 1MB: enabled
In: serial
Out: serial
Err: serial
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Net: fxp0: PHY is Marvell 88E1112S (1410c97)
me0, em0, fxp0 [PRIME], em1
ELF file is 32 bit
Loading .text @ 0x00010080 (184508 bytes)
Loading .rodata @ 0x0003d13c (14008 bytes)
Loading .rodata.str1.4 @ 0x000407f4 (16288 bytes)
Loading set_Xcommand_set @ 0x00044794 (92 bytes)
Loading .rodata.cst4 @ 0x000447f0 (12 bytes)
Loading .data @ 0x00045000 (13944 bytes)
Loading .sdata @ 0x00048678 (80 bytes)
Clearing .sbss @ 0x000486c8 (264 bytes)
Clearing .bss @ 0x000487d0 (9296 bytes)
## Starting application at 0x00010080 ...
Consoles: U-Boot console
Will try to boot from
USB
nand-flash0
nand-flash1
FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(bharanis@svl-junos-pool20.juniper.net, Fri Jun 10 00:52:46 PDT 2011)
Memory: 2048MB
Trying to boot from nand-flash0
Loading /boot/defaults/loader.conf
/kernel data=0xb9b65c+0xcb8d4 syms=[0x4+0x9f2b0+0x4+0xeae21]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0xa00000c0 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
platform_early_bootinit: MX-PPC Series Early Boot Initialization
mxppc_set_re_type: hw.board.type is MX10-T
mxppc_set_re_type: REtype:125, model:mx10-t, model:MX10-T, i2cid:1365
WDOG initialized
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1R4.6 #0: 2016-06-23 21:32:58 UTC
builder@mayland.juniper.net:/volume/build/junos/15.1/release/15.1R4.6/obj/powerpc/junos/bsd/kernels/JUNIPER-PPC/kernel
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
Timecounter "decrementer" frequency 66666666 Hz quality 0
cpu0: Freescale e500v2 core revision 3.0
cpu0: HID0 80004000<EMCP,TBEN>
real memory = 2118123520 (2020 MB)
avail memory = 2077224960 (1980 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing M/T/EX platform properties ..
nexus0: <Powerpc Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0
uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0
lbc0: <Freescale Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 20,21,22,24 on ocpbus0
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
tbbcpld0 iomem 0xff700000-0xff7fffff on lbc0
tbbcpld_attach: 1st IRQ alloc; start:4 end:4 flags:7
tbbcpld_attach: 2st IRQ alloc; start:6 end:6 flags:7
uart2: <16750 or compatible> iomem 0xff600000-0xff600007 on lbc0
uart3: <16750 or compatible> iomem 0xff500000-0xff500007 on lbc0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0
ds1672 rtc0: <DS1672 RTC> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xf7f03100-0xf7f03114 irq 59 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 02:00:00:00:00:0b
miibus0: <MII bus> on tsec0
gentbi0: <Generic ten-bit interface> on miibus0
gentbi0: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0
tsec1: hardware MAC address 02:00:00:00:00:04
miibus1: <MII bus> on tsec1
gentbi1: <Generic ten-bit interface> on miibus1
gentbi1: 1000baseSX-FDX, 1000baseT-FDX, auto
tsec2: <eTSEC ethernet controller> iomem 0xf7f26000-0xf7f26fff irq 47,48,49 on ocpbus0
tsec2: hardware MAC address 64:87:88:5d:cb:f7
miibus2: <MII bus> on tsec2
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus2
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
tsec3: <eTSEC ethernet controller> iomem 0xf7f27000-0xf7f27fff irq 53,54,55 on ocpbus0
tsec3: hardware MAC address 02:00:02:00:00:04
miibus3: <MII bus> on tsec3
gentbi2: <Generic ten-bit interface> on miibus3
gentbi2: 1000baseSX-FDX, 1000baseT-FDX, auto
pcib0: <Freescale MPC8572 PCI Express host controller> iomem 0xf7f09000-0xf7f09fff,0xe8000000-0xebffffff on ocpbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> mem 0xe8000000-0xe80fffff at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> mem 0xe8100000-0xe810ffff irq 0 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <serial bus, USB> at device 1.0 (no driver attached)
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xe8200000-0xe82000ff irq 21 at device 1.1 on pci2
usb0: EHCI version 1.0
usb0: <NEC uPD 72010x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: ATP Electronics ATP IG eUSB SSD, rev 2.00/11.00, addr 2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
umass1: UNIGEN QYR4000F4, rev 2.00/1.00, addr 3
umass1: SCSI over Bulk-Only; quirks = 0x0000
umass1:1:1:-1: Attached to scbus1
Initializing product: 121 ..
Setting up M/T interface operations and attributes
platform_cookie_read not implemented
Initializing MX-PPC platform mastership..
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <UNIGEN QYR4000F4 PMAP> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ATP ATP IG eUSB SSD 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
Kernel thread "wkupdaemon" (pid 56) exited prematurely.
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProductionEc_2016
Verified jboot signed by PackageProductionEc_2016
Verified jbase-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jkernel package on /dev/md1...
Verified manifest signed by PackageProductionEc_2016
Verified jkernel-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jpfe package on /dev/md2...
Verified manifest signed by PackageProductionEc_2016
Verified jpfe-MX80-15.1R4.6 signed by PackageProductionEc_2016
Mounted jdocs package on /dev/md3...
Verified manifest signed by PackageProductionEc_2016
Verified jdocs-15.1R4.6 signed by PackageProductionEc_2016
Mounted jroute package on /dev/md4...
Verified manifest signed by PackageProductionEc_2016
Verified jroute-ppc-15.1R4.6 signed by PackageProductionEc_2016
Executing /packages/mnt/jroute-ppc-15.1R4.6/mount.post..
Mounted jcrypto package on /dev/md5...
Verified manifest signed by PackageProductionEc_2016
Verified jcrypto-ppc-15.1R4.6 signed by PackageProductionEc_2016
Mounted jmacsec package on /dev/md6...
Verified manifest signed by PackageProductionEc_2016
Verified jmacsec-15.1R4.6 signed by PackageProductionEc_2016
Mounted jweb package on /dev/md7...
Verified manifest signed by PackageProductionEc_2016
Verified jweb-ppc-15.1R4.6 signed by PackageProductionEc_2016
Executing /packages/mnt/jweb-ppc-15.1R4.6/mount.post..
swapon: adding /dev/da0s1b as swap device
Automatic reboot in progress...
** Last Mounted on /mnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1861 files, 114511 used, 338429 free (29 frags, 42300 blocks, 0.0% fragmentation)
** Last Mounted on /mnt/config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
14 files, 16 used, 50265 free (17 frags, 6281 blocks, 0.0% fragmentation)
** Last Mounted on /mnt/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
315 files, 652821 used, 767211 free (275 frags, 95867 blocks, 0.0% fragmentation)
** /dev/da1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 767211 free (275 frags, 95867 blocks, 0.0% fragmentation)
tunefs: soft updates remains unchanged as disabled
chown: wheel: Invalid argument
Creating initial configuration...mgd: warning: schema: init: 'logical-systems-vlans' contains-node 'juniper-config vlans': not found
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
checking for core dump...
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /modules/peertype;/modules/ifpfLoading the IMA Link Media Layer; Attaching to media services layer
Loading the IMA Group Media Layer; Attaching to media services layer
e_drv;/modules/ifpfe_media;/modules/platform;/moLoading the SONET Media Layer; Attaching to media services layer
dules;
kld netpfe media: ifpfem_ds0 ifpfem_ds1e1 ifpfem_ds3e3 iLoading the CHMIC module
fpfem_ima ifpfem_otn ifpfem_sonetkld netpfe drv: ifpfed_atm ifpfed_chmic ifpfed_controller ifpfed_ds0 ifpfed_ds1interface ifpfed_eth.1 already present in the KLD 'kernel'!
e1 ifpfed_ds3e3 ifpfed_ethkldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error
ifpfed_irb ifpfed_lt ifpfed_Loading POS driver
ml_cmn ifpfed_ml_ha ifpfed_pos ifpfed_pppoe ifpfed_ps ifpfed_sa Loading Aggregate sonet driver
ifpfed_svcs ifpfed_vtkld platform: mt_ifpfeLoading Multilink Services PICs module.
Loading the M&T Platform NETPFE module
kld peertype: peertype_asp peertype_msp peertype_slavere peertype_xdpc ipsec kldcryptosoft0: <software crypto> on nexus0
kats kldIPsec: Initialized Security Association Processing.
.
Doing additional network setup:.Loading JUNOS chassis module
chassis_init_hw_chassis_startup_time: chassis startup time 0.000000
Starting final network daemons:.
chassis.ko loaded setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.powerpc initialization:.
Lock Manager
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved.
Unix Domain sockets Lock manager
Lock manager 'lockmgr' started successfully.
Database Initialization Utility
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved.
/var/pdb/profile_db initialized
Profile database initialized
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Mon Jul 11 08:32:27 UTC 2016
JJJJJJJ
Amnesiac (ttyu0)
login: Jul 11 08:32:37 init: exec_command: /usr/sbin/oamd (PID 1714) started
Jul 11 08:32:37 init: tunnel-oamd (PID 1714) started
Jul 11 08:32:37 init: exec_command: /usr/sbin/lfmd (PID 1715) started
Jul 11 08:32:37 init: ethernet-link-fault-management (PID 1715) started
Jul 11 08:32:38 init: dhcp-service (PID 1583) sending signal usr2: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: general-authentication-service (PID 1584) sending signal usr1: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: exec_command: /usr/sbin/cfmd (PID 1716) started
Jul 11 08:32:38 init: ethernet-connectivity-fault-management (PID 1716) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/mplsoamd (PID 1717) started
Jul 11 08:32:38 init: mpls-traceroute (PID 1717) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/sendd (PID 1718) started
Jul 11 08:32:38 init: secure-neighbor-discovery (PID 1718) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/iccpd (PID 1719) started
Jul 11 08:32:38 init: iccp-service (PID 1719) started
Jul 11 08:32:38 init: subscriber-management (PID 1585) sending signal hup: due to "proto-mastership": 0x1
Jul 11 08:32:38 init: stats-agent (PID 1586) terminate signal 15 sent
Jul 11 08:32:38 init: exec_command: /usr/sbin/jddosd (PID 1720) started
Jul 11 08:32:38 init: ddos-service (PID 1720) started
Jul 11 08:32:38 init: can not access /usr/sbin/gstatd: No such file or directory
Jul 11 08:32:38 init: gstatd (PID 0) started
Jul 11 08:32:38 init: can not access /usr/sbin/transportd: No such file or directory
Jul 11 08:32:38 init: transport-control (PID 0) started
Jul 11 08:32:38 init: exec_command: /usr/sbin/agentd (PID 1721) started
Jul 11 08:32:38 init: SDN-Telemetry (PID 1721) started
Подскажите, версия jinstall-ppc-15.1R4.6-domestic-signed.tgz подходил для функционала BGP+BRAS+NAT(mic-16g)
ОтветитьУдалитьВижу что вы тестировали эту версию. Имеем проблемы с натом и хотим перейти на 15.1r4 с 13.3r9, стоит ли? так как добавлено по больше функционала для нат карты.
Подходит. Есть клиент которые ее используют.
УдалитьСпасибо за ответ, попробуем обновится.
Удалить